jbquintal Posted January 5, 2021 Share Posted January 5, 2021 (edited) Hi Everyone, for some reason I can't seem to access the webGUI. I took a look at a few threads with the same issue and tried some of the solutions, but nothing worked or isn't applicable. I'm currently doing a pre-clear of two drives and a parity check. I'm able to access the machine via SSH and things seem to be working... All docker apps seem to be working just fine and are reachable via their respective webGUIs. That being said, I've attached my diagnostics file to see if anyone can help figure out what's wrong. I'll keep it up until the parity check finishes and I'll do a reboot to see if that resolves the issue. By the way, is "powerdown -r" the right way to gracefully shutdown? cosmos-diagnostics-20210106-0037.zip Edited January 5, 2021 by jbquintal added pictures Quote Link to comment
trurl Posted January 5, 2021 Share Posted January 5, 2021 11 minutes ago, jbquintal said: tried some of the solutions like what? Quote Link to comment
jbquintal Posted January 5, 2021 Author Share Posted January 5, 2021 10 minutes ago, trurl said: like what? Apologies for not outlining what I've tried. In any case, here's what I've looked at so far. https://forums.unraid.net/topic/87876-500-internal-server-error-solved/ <--- Doesn't seem to apply. I don't have any VLANs or any load balancing set up... https://forums.unraid.net/topic/70428-unraid-500-internal-server-error/ <--- Doesn't seem to apply. Plex and other Dockers seem to work just fine. I can play vides on Plex... https://forums.unraid.net/topic/86364-500-internal-server-error-nginx/ <--- Doesn't seem to apply. Different error codes in /var/log/nginx... https://www.reddit.com/r/unRAID/comments/7ygav2/webgui_500_internal_server_error/ <--- Tried this... Quote Link to comment
trurl Posted January 5, 2021 Share Posted January 5, 2021 There has been some back and forth between Unassigned Devices and Preclear development recently so maybe something to do with the preclears? Quote Link to comment
jbquintal Posted January 5, 2021 Author Share Posted January 5, 2021 2 minutes ago, trurl said: There has been some back and forth between Unassigned Devices and Preclear development recently so maybe something to do with the preclears? Thanks. I did notice the Unassigned Devices error keep cropping up. I did a quick search before and it just says that it's caused by having multiple browsers open. In any case, i'll just finish the parity check and reboot the server and observe if it'll happen again. "powerdown -r" is the proper way to do it, right? Quote Link to comment
trurl Posted January 5, 2021 Share Posted January 5, 2021 8 minutes ago, jbquintal said: "powerdown -r" is the proper way to do it, right? I hadn't needed to do that recently so I checked the code: root@unSERVER:~# which powerdown /usr/local/sbin/powerdown root@unSERVER:~# cat /usr/local/sbin/powerdown #!/bin/bash logger "/usr/local/sbin/powerdown has been deprecated" if [[ "$1" == "-r" ]]; then /sbin/reboot else /sbin/init 0 fi root@unSERVER:~# Looks like that would log that it was deprecated and then go ahead and do reboot instead Quote Link to comment
jbquintal Posted January 5, 2021 Author Share Posted January 5, 2021 11 minutes ago, trurl said: I hadn't needed to do that recently so I checked the code: root@unSERVER:~# which powerdown /usr/local/sbin/powerdown root@unSERVER:~# cat /usr/local/sbin/powerdown #!/bin/bash logger "/usr/local/sbin/powerdown has been deprecated" if [[ "$1" == "-r" ]]; then /sbin/reboot else /sbin/init 0 fi root@unSERVER:~# Looks like that would log that it was deprecated and then go ahead and do reboot instead Thanks! Quote Link to comment
jbquintal Posted January 5, 2021 Author Share Posted January 5, 2021 I rebooted the server as soon as my parity check finished. I'm able to access the WebGUI now. I'll update this post if it acts up again. Quote Link to comment
ZION Posted August 15, 2022 Share Posted August 15, 2022 I'm not sure why this was so difficult to find or answer but here is how to correct the error without restating the machine. From the console, log in to the terminal using the Root account. Once logged in type the following command: /etc/rc.d/rc.php-fpm restart Done. You can now log back in via WebUI. Other useful Unraid commands can be found here: https://selfhosters.net/commands/ 1 4 2 Quote Link to comment
LordShad0w Posted October 10, 2022 Share Posted October 10, 2022 On 8/15/2022 at 1:28 PM, ZION said: I'm not sure why this was so difficult to find or answer but here is how to correct the error without restating the machine. From the console, log in to the terminal using the Root account. Once logged in type the following command: /etc/rc.d/rc.php-fpm restart Done. You can now log back in via WebUI. Other useful Unraid commands can be found here: https://selfhosters.net/commands/ I dealt with this exact issue today and your response fixed things perfectly. Thank you. 1 Quote Link to comment
darthjonathan12 Posted January 12, 2023 Share Posted January 12, 2023 On 8/15/2022 at 4:28 PM, ZION said: I'm not sure why this was so difficult to find or answer but here is how to correct the error without restating the machine. From the console, log in to the terminal using the Root account. Once logged in type the following command: /etc/rc.d/rc.php-fpm restart Done. You can now log back in via WebUI. Other useful Unraid commands can be found here: https://selfhosters.net/commands/ I have the same error but this did not fix the issue. Quote Link to comment
sMACk Posted February 11 Share Posted February 11 (edited) I am running into this issue regularly... I was fiddling with CPU isolation and pinning recently but can't think of anything else I changed that could be responsisble... anyone figure anything permanent out? update: remove GPUstatistics plugin as that was identified as a potential culprit by others, waiting to see if the issue is resolved... Edited February 11 by sMACk progress Quote Link to comment
Waddoo Posted August 1 Share Posted August 1 On 2/11/2024 at 1:38 PM, sMACk said: I am running into this issue regularly... I was fiddling with CPU isolation and pinning recently but can't think of anything else I changed that could be responsisble... anyone figure anything permanent out? update: remove GPUstatistics plugin as that was identified as a potential culprit by others, waiting to see if the issue is resolved... Was this the culprit? My Unraid running 6.12.10, I can ssh and access other dockers, but not the webgui. Quote Link to comment
sMACk Posted September 1 Share Posted September 1 On 7/31/2024 at 10:38 PM, Waddoo said: Was this the culprit? My Unraid running 6.12.10, I can ssh and access other dockers, but not the webgui. I believe it was, apologies for taking so long to respond! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.