[SOLVED] Broadcom 57810S - NICs Not Populating in GUI


Recommended Posts

Heya, I've got a few spare 10G NICs I've been using (esx 6.7/7.0 support) for my servers and I'm attempting to get them to work in one of my unraid boxes.  I can see the adapter in lspci and see that the kernel module is loaded, but nothing shows up under ifconfig or in the GUI to configure them.  I've went in an deleted the previous network configuration to get a fresh start, but nothing seems to be getting me anywhere.

 

lcpci entries:

03:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM57810 10 Gigabit Ethernet (rev ff)
03:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II BCM57810 10 Gigabit Ethernet (rev ff)
 

lsmod entries:

bnx2x                 647168  0
mdio                   16384  1 bnx2x
 

 

Thanks in advance!dstore-diagnostics-20210110-1428.zip

Link to comment

NICs are found but fail to load the driver because of an error:

Jan 10 14:02:06 dstore kernel: bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
Jan 10 14:02:06 dstore kernel: bnx2x 0000:03:00.0: msix capability found
Jan 10 14:02:06 dstore kernel: bnx2x: PCI device error, probably due to fan failure, aborting
Jan 10 14:02:06 dstore kernel: bnx2x 0000:03:00.1: msix capability found
Jan 10 14:02:06 dstore kernel: bnx2x: PCI device error, probably due to fan failure, aborting

So this is a Linux or hardware issue, maybe look for a firmware update.

  • Thanks 1
Link to comment
  • JorgeB changed the title to [SOLVED] Broadcom 57810S - NICs Not Populating in GUI

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.