My Unraid for Smarthome and Mediasharing


1 post in this topic Last Reply

Recommended Posts

little history

 

10 years ago i built my first homeserver with an amd x2 64 6000+ and a normal office pc mainboard. i used basic sata disks and the os was windows homeserver 2011. then, 5 years later i bought a used chenbro sr 107 case with 1 4x backplane and a promise raid adapter but kept the mainboard and cpu.

 

2 more years were gone when i got a cheap supermicro x8sie-ln4f with an intel xeon x3430 and 8gb ram later i got an ibm m5015 raid controller.

I bought a second 4x Backplane and switched to openmediavault as os and it worked for a while but it wasn't exactly what i'm looking for.

 

Then I changed the raid controller to an ibm m1015 hba, flashed it to it mode and tried Unraid in June 2020 and this was exactly the system that has all features that i needed.

 

In November 2020 I replaced the motherboard to x9sca-f with an intel xeon e-3 1220 v2.

 

hardware

 

OS at time of building:

      Unraid 6.8.2

CPU:

      Intel Xeon E-3 1220 v2

Motherboard:

      Supermicro X9SCA-F

RAM:

      Kingston 16 GB ECC DDR3 1333 (4x 4GB)

Case:

      Chenbro SR10766

Backplanes:

      2x Chenbro MiniSAS 4x Disk Cages HotPlug

      2x Chenbro Sata3 1x Disk Cage HotPlug

PowerSupply:

      Inter-Tech Combat Power CP 650W

SATA HBA:

      IBM MegaRaid M1015 (flashed to IT Mode)

Fans:

      Front: 2x Stock 120mm Chenbro Fans with builtin temperature-diode

      Back: 1x Revoltek 120mm Fan

      HBA: 1x Noctua NF-A9x14 PWM 92mm Fan

      CPU: 1x Intel Stock Cooler

 

Drives:

      Parity:

                 1x Seagate IronWolf 4GB 3,5" ST4000VN008

      Data:

                 2x Seagate IronWolf 4GB 3,5" ST4000VN008

                 2x Western Digital Red 3GB 3,5" WD30EFRX

                 2x Western Digital Red 1GB 3,5" WD10EFRX

      Cache:

                 2x SanDisk SSD Plus 128GB 2,5"

      Total Data Capacity:

                 16GB

 

Primary Use:

      Smart Home like OpenHAB, Homematic, ioBroker (vm/docker)
      Datastorage for movies, music, tv-shows, own files and backups (smb shares)

      Recorder for twitchstreams (streamlink-recorder)

      Jellyfin (Mediasharing for FireTV and Chromecast)

      NextCloud (docker)

      TeamSpeak³ (docker)

 

Future Plans:

      add a nvidia gt 1030 graphics card for hw encoding

      SSDs with more capacity

      1 TB HDD replacement with more capacity

      More RAM (32 GB instead of 16GB)

      much better psu

      change all fans and the cpu-cooler to Noctua

      more powerful cpu with 4cores plus ht

 

pictures

 

g5BqXoO.jpg

the upper one is the productive server, the other one is just my little playground

 

6yTIOEf.jpg

opened door to access the disks and power/reset-button

 

LBJZyjp.jpg

Internal view to mainboard, addin-cards and rear-fan

(I have to clean it up and remove the dust) 

 

trjNOdZ.jpg

view to the backplanes and cable-management

 

WTBcZKn.jpg

The very simple and basic power supply

Edited by Mattes
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.