adminmat Posted January 13, 2021 Share Posted January 13, 2021 (edited) Tried to login in tonight via GUI and got "500 Internal Server Error nginx". No GUI access but Plex and Pinhole etc are still reachable. I saved the log via "cp /var/log/syslog /boot/syslog.txt". Can i post this in entirety or does it need to be sterilized? I copy and pasted this diagnostics into a Notepad ++ .txt file via SSH. The error here looks like it's trying to connect to my phone. (Phone's IP address) 500 Internal Server Error nginx Edited January 13, 2021 by adminmat Quote Link to comment
adminmat Posted January 13, 2021 Author Share Posted January 13, 2021 Good morning, bumping this back up. Quote Link to comment
adminmat Posted January 14, 2021 Author Share Posted January 14, 2021 Anyone have any thought on this? I hate to have to do an unclean shutdown again. Should I contact Limetech directly? Quote Link to comment
rjorgenson Posted January 19, 2021 Share Posted January 19, 2021 (edited) This same thing just happened to me last night. I am not able to SSH into the host or get to the GUI to attempt to troubleshoot/reboot but the VM's are still running and everything else seems okay. I have no idea what to do other than just do a hard reset, which seems like a not so great idea. *edit* - Also I am stubbing my GPU to a VM so my unRAID console is not available, no idea what is in there =/ Edited January 19, 2021 by rjorgenson Quote Link to comment
adminmat Posted January 19, 2021 Author Share Posted January 19, 2021 31 minutes ago, rjorgenson said: This same thing just happened to me last night. I am not able to SSH into the host or get to the GUI to attempt to troubleshoot/reboot but the VM's are still running and everything else seems okay. I have no idea what to do other than just do a hard reset, which seems like a not so great idea. *edit* - Also I am stubbing my GPU to a VM so my unRAID console is not available, no idea what is in there =/ I was able to SSH into unraid. When you SSH in (using putty for example) do you get an option to enter a username or password? If you can SSH in to unraid you can use these commands to save the syslog to the flash before you shut down / reboot. When you shut down the logs will be lost: tail -f /var/log/syslog > /boot/syslog.txt or cp /var/log/syslog /boot/syslog.txt I also set up a syslog server on another PC using these instructions to keep a copy of what is going on if it happens again (so far it hasn't). Quote Link to comment
rjorgenson Posted January 19, 2021 Share Posted January 19, 2021 Nope, my ssh connection to the server just hangs. I had an open session running midnight commander that was responsive, but when i tried to run a new shell command it just hung and is still sitting there after a few hours. My only option is to try an ACPI reboot via the power button and hope that is configured properly I guess. Quote Link to comment
adminmat Posted January 19, 2021 Author Share Posted January 19, 2021 32 minutes ago, rjorgenson said: Nope, my ssh connection to the server just hangs. I had an open session running midnight commander that was responsive, but when i tried to run a new shell command it just hung and is still sitting there after a few hours. My only option is to try an ACPI reboot via the power button and hope that is configured properly I guess. I ended up using the wrong command when I shut down that actually initiated a 'reset'. Which is as bad as hard shutdown. I should have read more at the time. Fortunately I didn't seem to have any corruption afterwards. So I setup a remote syslog server to capture what happens before the next crash. Quote Link to comment
rjorgenson Posted January 20, 2021 Share Posted January 20, 2021 Had to give it the old hard power cycle =/ It came back up fine and is running a parity check. Nothing in the logs from before the restart either. I'll look into setting up a syslog sever like you suggested in case it ever happens again. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.