[SOLVED] Unraid reboots needs BIOS menu every time

[unraid_2021]

Hi 

 

I have just built my new PC, have MSI Torpedo B460 MB, 32 GB RAM. I am using SanDisk USB 2.0 Flash Drive 32GB. Used the Unraid  USB creator, set the USB as UEFI. Unraid version 6.9.o-rc2 (also same issue on 6.8.3).  Using 6.9.o-rc2 for support of 2.5G Realtek® RTL8125B 2.5Gbps LAN controller 

 

The first install boot works fine and I can see the WebUI but when I restart the unraid server from webUI it does not restart and I have to go into BIOS menu (pressing DEL Key at powerup) and exit for it to start again. In BIOS menu no changes are done, it is just that it needs to go to BIOS menu every time for unraid to start.

 

The same behavior happens for shutdown. Any help pointers on where I can troubleshoot the same

 

 

 

 

Edited January 14, 2021 by unraid_2021

[itimpi]

This sounds like a motherboard issue rather than an Unraid one   Have you tried checking for a more recent BIOS or on the MSI forums?   Could it be the CMOS battery?

[unraid_2021]

thanks no i will post on MSI forums as well see if there are any pointers

[unraid_2021]

so tried some other options and looks like it is working. Why I don't know but will be good to hear views. Solution posted at thread below
 

 

[Woogz]

For anyone who finds this in the future. Disabling Fast Boot fixed it for me. I didn't make any changes to DTM.

[Grobalt]

Thanks for the hint, same for me

[halorrr]

On 7/14/2021 at 12:43 PM, Woogz said:

For anyone who finds this in the future. Disabling Fast Boot fixed it for me. I didn't make any changes to DTM.

Same for me, if you look at the original thread, you can see when they save the changes that one of the side effects of enabling DTM is that is disables Fast Boot, so they technically end up toggling the same setting, but in a more round about way.