qprints Posted January 23, 2021 Share Posted January 23, 2021 (edited) I’d like to add a second parity drive but don’t have a spare drive bay (15 bay all used) I do have a 3tb data drive that has no files on, what would be the best way to remove that and add the new 8tb parity drive Thanks Dave Edited January 24, 2021 by qprints (SOLVED) Quote Link to comment
trurl Posted January 23, 2021 Share Posted January 23, 2021 Tools - New Config, Preserve All. It will let you make changes to assignments before starting the array. Assign disks however you want, without the disk you want to remove and with new parity2. Be very sure you don't accidentally assign any disk with data on it to any parity slot. Then start the array to begin parity rebuild. Both parity will rebuild and both need to rebuild since you have removed a data disk. Quote Link to comment
trurl Posted January 23, 2021 Share Posted January 23, 2021 Since you need to remove a disk before you can plug in that other disk, go to Settings - Disk Settings and disable autostart. Then shutdown and remove and install disks as needed. Then follow the instructions in my previous post. Quote Link to comment
qprints Posted January 24, 2021 Author Share Posted January 24, 2021 Thanks a lot, parity sync in progress 😀 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.