frankie666 Posted January 29, 2021 Share Posted January 29, 2021 Hi, I wish to monitor my unraid server (basic things as disk space, disk temp, state, etc.) from my home automation system (jeedom)... Has anyone already done this (or with another ha) ? Thanks in advance. Quote Link to comment
BVD Posted January 31, 2021 Share Posted January 31, 2021 Absolutely - just set up SNMP, and you're off to the races. I know homeassistant supports using SNMP as a sensor type, I'd assume others would as well. Good luck! Quote Link to comment
frankie666 Posted January 31, 2021 Author Share Posted January 31, 2021 7 hours ago, BVD said: Absolutely - just set up SNMP, and you're off to the races. I know homeassistant supports using SNMP as a sensor type, I'd assume others would as well. Good luck! thx, i'll have a look. Quote Link to comment
gberg Posted February 1, 2021 Share Posted February 1, 2021 I would also like to see this, but it seems Unraid is a bit limited on what's showing via SNMP, for instance it doesn't show any information about the HDD:s like serial numbers and temperatures. I have attached two screenshots from my Observium server, the first one shows what my Unraid NAS reports and the second shows what a Qnap NAS is reporting. My Unraid shows alot of stuff taken from Supermicro IPMI, but nothing seems to be rported regarding the HDD:s Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.