January 30, 20215 yr Hello all, I'm having a repeatable issue with my array where it will completely fill up one of the 9 data drives to 100% and then KEEP trying to write to it, primarily the mover. I've attached several screenshots and logs, but this has happened several times now. To resolve it I open up qdirstat and manually move files to a different drive using krusader. In the screenshots, you can see a sample of the shares settings, all which leave at least 10GB free, split level any, and use High-water allocation. The first time it happened it was disk 7, now it's disk 5 that is being filled up In terms of hardware, I have a Xeon E3-1270v2, Supermicro x9scl, 32GB Ram, 10hdds ranging from 2-8GB with 2 500GB SSD cache drives. Thanks for any help you can provide! spoirnas-diagnostics-20210130-0822.zip
January 31, 20215 yr Community Expert Likely one of these: Appdatada is using a lot of disks, including dis5, and split level is set to 2 Share name that starts and ends with a T is also using disk5 and split level is set to 3.
Archived
This topic is now archived and is closed to further replies.