February 1, 20215 yr I cannot seem to get the net via the UnRaid initial setup. I'm not an expert in this area, but I do have very knowledgeable help from friends. I was indicated its a strong possibility the OS does not have driver support for my HW configuration. I cannot successfully ping any known active devices on my home network. I’ve gone through all the obvious possibilities…Bios setup, Layer 1 issues etc. If my friends here cannot help, then I’ll need to go a different direction. Thanks in advance, Bill Omnitestinc.com
February 1, 20215 yr Community Expert 13 minutes ago, HighRoller said: my HW configuration What can you tell us about that?
February 1, 20215 yr Community Expert What version of Unraid are you using? If it is recent hardware then you may well need to use the 6.9.0-rc2 release to have support for your NIC - particularity if it is a 2.5Gb variant.
February 1, 20215 yr 15 hours ago, itimpi said: What version of Unraid are you using? If it is recent hardware then you may well need to use the 6.9.0-rc2 release to have support for your NIC - particularity if it is a 2.5Gb variant. I have this motherboard coming since my Aorus Extreme died randomly. This motherboard has Intel chips X710-AT2 and i225. From what I can tell the i225 is apparently supported in the latest beta. Getting the X710 working would likely require either a new kernel or module or both. I actually couldn't find much about Linux support for this chip.
February 2, 20215 yr Author 23 hours ago, trurl said: What can you tell us about that? After more research on your site, it appears as if my on-board network HW may not be compatible with the Unraid ver 6.8.3. My HW: MB = Asrock TRX40D8-2N2T uP = AMD 3960x Mem = 128G Drives = 12 x ST2000NM0033 2TB M2 = 2x Force MP600 1TB The MB has the following Ethernet interface description: Ethernet Interface - 10Gbps/2.5Gbps LAN Controller - 2 x RJ45 10GbEby Intel® X710-AT2 - 2 x RJ45 2.5GbEby Intel® i225 - Supports Wake-On-LAN - Supports Energy Efficient Ethernet 802.3az - Supports PXE - LAN3 Supports NCSI
February 2, 20215 yr Author OK, looks like using the 6.9.0-rc2 release got me up and running... Thanks for the help! Is there a tip jar in this place?
April 19, 20215 yr On 2/1/2021 at 7:23 PM, HighRoller said: After more research on your site, it appears as if my on-board network HW may not be compatible with the Unraid ver 6.8.3. My HW: MB = Asrock TRX40D8-2N2T uP = AMD 3960x Mem = 128G Drives = 12 x ST2000NM0033 2TB M2 = 2x Force MP600 1TB The MB has the following Ethernet interface description: Ethernet Interface - 10Gbps/2.5Gbps LAN Controller - 2 x RJ45 10GbEby Intel® X710-AT2 - 2 x RJ45 2.5GbEby Intel® i225 - Supports Wake-On-LAN - Supports Energy Efficient Ethernet 802.3az - Supports PXE - LAN3 Supports NCSI Is it reliable, is it stable? I am looking at getting a TRX40D8-2N2T with 256 RAM but can't really find reviews. Also can't find many note on people recommending or discouraging RAM for that board.
April 20, 20215 yr On 4/19/2021 at 7:00 AM, sekrit said: Also can't find many note on people recommending or discouraging RAM for that board. Did you check ASROCK QVL ? : https://www.asrockrack.com/general/productdetail.asp?Model=TRX40D8-2N2T#Memory
Archived
This topic is now archived and is closed to further replies.