Userpaul Posted February 3, 2021 Share Posted February 3, 2021 Hi Back in 2015 I purchased two keys and I am currently using one and have never needed to use the second usb. I had a bit of a scare a few days back as my server was only intermittently reading the usb stick. (Cannot find device bond 0) error. After a little playing around the usb stick is now currently working, although it could fail anytime. Is there a simple way to copy my current configuration to my second usb which I have never used or updated from when it was purchased? I have taken regular backups of my usb in the server using the tool provided by Unraid. Basically, what I want to be able to do is connect my second USB to my windows pc and copy my configuration from the usb in the unraid server to the usb stick in my pc that has the second license key. Then if one fails I can just plug in the second usb and carry on using the server whilst I replace the failed one. Thank you in advance Paul Quote Link to comment
itimpi Posted February 3, 2021 Share Posted February 3, 2021 All you need to do is copy across the ‘config’ folder to get all your configuration information onto the second USB stick. having said that if the second USB stick is not on the same Unraid release you may want to copy across everything from the 1st one. Make sure you keep track of which license file goes with which stick (and ideally have them backed up somewhere safe). Quote Link to comment
trurl Posted February 3, 2021 Share Posted February 3, 2021 50 minutes ago, itimpi said: copy across the ‘config’ folder But you will want to keep the .key file of that second license. Quote Link to comment
trurl Posted February 3, 2021 Share Posted February 3, 2021 8 minutes ago, Userpaul said: Pro2.key go in the config folder Instead of the Pro1.key Best to not keep both keys on the same flash. It will work that way but if you ever need to replace there have been reports of the wrong key getting blacklisted. Quote Link to comment
Userpaul Posted February 4, 2021 Author Share Posted February 4, 2021 (edited) No Joy Copied config folder and put pro2.key in config folder - Flashing curser at boot Used creater tool on 2nd usb with backup from pro1.key usb and pasted pro2.key in config folder on 2nd usb - flashing curser at boot again. Am I missing something, I have checked that pro2.key is bonded to usb EDIT Ran make bootable in admin mode as suggested in another post- checked uefi is uefi- Both usb sticks are same brand Trancend 2gb Ran chk disc No errors found Thank you Edited February 4, 2021 by Userpaul spelling & update Quote Link to comment
trurl Posted February 4, 2021 Share Posted February 4, 2021 1 hour ago, Userpaul said: Thank you So have you solved your problem? Quote Link to comment
Userpaul Posted February 4, 2021 Author Share Posted February 4, 2021 (edited) No. My flash drive will not boot. Seems to work fine in pc and laptop c Can I use pro2.key on my current server? Or is the second key for another build. Edited February 4, 2021 by Userpaul Addition Quote Link to comment
itimpi Posted February 4, 2021 Share Posted February 4, 2021 26 minutes ago, Userpaul said: No. My flash drive will not boot. Seems to work fine in pc and laptop Since the USB stick is booting fine on other machines it is obviously something specific to this one. I suggest you remove the trailing ~ from the uefi folder to see if you can boot in UEFI mode. 28 minutes ago, Userpaul said: Can I use pro2.key on my current server? Or is the second key for another build. Unraid licence keys are valid for all releases of Unraid so no problem doing this if you want. Quote Link to comment
Userpaul Posted February 4, 2021 Author Share Posted February 4, 2021 (edited) I tried removing the - and it made no difference I’m puzzled tbh If I set up the usb a new flash drive and tried to boot from that would that have a bad impact on my current set up or damage my current drives in any way? Edited February 4, 2021 by Userpaul Added questions Quote Link to comment
trurl Posted February 5, 2021 Share Posted February 5, 2021 19 hours ago, Userpaul said: If I set up the usb a new flash drive Your configuration is completely contained in the config folder on the boot flash. If you setup another flash without your old config, then you are starting from scratch with no disks assigned. If you copy the old config then you will have exactly the same configuration as before. If you copy part of the old config, then you will have those parts of your old config and others would be default. This wiki gives some idea of how that would work: https://wiki.unraid.net/Upgrading_to_UnRAID_v6#Files_on_flash_drive In any case, your license .key file will not work with another flash so your license will have to be transferred. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.