DrNeutron Posted February 4, 2021 Share Posted February 4, 2021 Hi, First post here as I move from Netgear ReadyNAS Pro 6 to Unraid on the SAME hardware. Using a VGA ribbon cable I've now got the old ReadNAS HW running Unraid from a external USB drive and its great!!! Question on the licence, Basic allows 6 attached devices (boot flash excluded) but on the Netgear HW they have a tiny 128MB internal USB drive you can't remove, this is used for emergency recovery. It shows up as an unassigned device. Unassigned Devices DEVICE IDENTIFICATION TEMP sdc WDC_WD40EFRX-68WT0N0_WD-WCC4E0R***** - 4 TB (sdc) sda SMI_USB_DISK_AA04012700007570-0:0 - 128 MB (sda) Will this count against the 6 devices of the licence? Any way to block it from counting or showing up as I can't use it but I want to be able to use all 6 bays of my HW? Thanks, Gordon Quote Link to comment
SpencerJ Posted February 4, 2021 Share Posted February 4, 2021 16 hours ago, DrNeutron said: Hi, First post here as I move from Netgear ReadyNAS Pro 6 to Unraid on the SAME hardware. Using a VGA ribbon cable I've now got the old ReadNAS HW running Unraid from a external USB drive and its great!!! Question on the licence, Basic allows 6 attached devices (boot flash excluded) but on the Netgear HW they have a tiny 128MB internal USB drive you can't remove, this is used for emergency recovery. It shows up as an unassigned device. Unassigned Devices DEVICE IDENTIFICATION TEMP sdc WDC_WD40EFRX-68WT0N0_WD-WCC4E0R***** - 4 TB (sdc) sda SMI_USB_DISK_AA04012700007570-0:0 - 128 MB (sda) Will this count against the 6 devices of the licence? Any way to block it from counting or showing up as I can't use it but I want to be able to use all 6 bays of my HW? Thanks, Gordon Hello Gordon, Unassigned Devices do count towards the license total. Is there any way to safely remove or unplug this internal USB? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.