keymaster Posted February 9, 2021 Share Posted February 9, 2021 Hi Since updating the motherboard (MSI mortar) and CPU (AMD Ryzen 5 3200) I have constant 100% usage on two cores, I have tried htop and top on terminal but I am not experienced enough to tell what is going on. Even with no dockers running and no VMs running two cores or threads 100% - I am really stuck and have been for months and am considering hiring somebody to sort this for me as its puching me over the edge. Quote Link to comment
keymaster Posted February 16, 2021 Author Share Posted February 16, 2021 Hi Just to update as requested please find attached diagnostic file. Many thanks K tower-diagnostics-20210216-1523.zip Quote Link to comment
jonp Posted February 16, 2021 Share Posted February 16, 2021 What system on your network has IP address ending in 222? I see nginx is rate limiting that client from connecting for some reason. Curious if you have a rogue machine on the network just hammering your server. Quote Link to comment
keymaster Posted February 16, 2021 Author Share Posted February 16, 2021 Hi Thanks for reply, that is my current PC, from which I access dashboard and watch content sometime. best wishes Quote Link to comment
keymaster Posted February 23, 2021 Author Share Posted February 23, 2021 Hi ehmmm, not sure what next move is, perhaps clean/fresh install ? thanks K Quote Link to comment
tjb_altf4 Posted February 23, 2021 Share Posted February 23, 2021 2 hours ago, keymaster said: Hi ehmmm, not sure what next move is, perhaps clean/fresh install ? thanks K Are your CPU cores still pinned @ 100% if the array is stopped? Quote Link to comment
keymaster Posted February 24, 2021 Author Share Posted February 24, 2021 32 minutes ago, tjb_altf4 said: Are your CPU cores still pinned @ 100% if the array is stopped? Hi Thank you for your help, yes they are. Thanks K Quote Link to comment
tjb_altf4 Posted February 24, 2021 Share Posted February 24, 2021 2 minutes ago, keymaster said: Hi Thank you for your help, yes they are. Thanks K What does htop look like when array is stopped ? It sounds like a similar issue to the bug report I posted, especially as you are on 6.9 also. Quote Link to comment
keymaster Posted February 24, 2021 Author Share Posted February 24, 2021 Hi Hmmm, thank you so much, so what should I do, do you think I should revert to stable, do fresh install or? Best wishes K Quote Link to comment
tjb_altf4 Posted February 24, 2021 Share Posted February 24, 2021 2 minutes ago, keymaster said: Hi Hmmm, thank you so much, so what should I do, do you think I should revert to stable, do fresh install or? Best wishes K I'm hanging out for next release (rc3 or stable) which shouldn't be to far away (days or weeks), but if its impacting your day to day usage definitely roll back to stable. Quote Link to comment
keymaster Posted March 2, 2021 Author Share Posted March 2, 2021 Hi Ok just updated to new stable release and no change. I have just set up my friends server with a ryzen and no such issue on his so assuming its hardware and as nobody on any of the help contacts has come up with solution I am assuming faulty mainboard or CPU so now working on a replacement. I am worried if I get new mainboard and CPU and then find this continues I may totally lose the plot however. In Answer to Jons question earlier in thread - it is not just cosmetic it is definitly effecting performance. Many thanks K Quote Link to comment
Icescream Posted March 2, 2021 Share Posted March 2, 2021 When going from 6.8.3 to 6.9 RC2, I had something similar happening to me. My CPU was stuck in power save mode on 800MHz, resulting is 100% on multiple cores. I had to put my the "CPU Scaling Governor"-setting to Perfomance using the Tips & Tweaks plugin. However, with the issue above solved, it happened again when booting a VM. For some reason when I upgraded, my VM broke and I ended up deleting and recreating it. Quote Link to comment
keymaster Posted March 2, 2021 Author Share Posted March 2, 2021 Hi Icecream Thank you, I tried that and no change. K Quote Link to comment
keymaster Posted March 4, 2021 Author Share Posted March 4, 2021 Hi Guys I know I keep asking but can somebody please help me with this, even if I got to pay somebody to do for me, this has been frustrating as hell and been going on for months. Even if I have to rebuild server with new CPU, change back to intel, delete whole thing and start again, please just end this for me 😞 the CPU doesnt even do my transcoding, that is done by my GPU but still 2 cores at 100% 24/7, I am happy to try anything. K Quote Link to comment
tjb_altf4 Posted March 5, 2021 Share Posted March 5, 2021 (edited) Have you upgraded to 6.9.0 ? I've seen a slight improvement after upgrading (and a couple reboots).... now only 1 core pegged @ 100% 24/7 Edited March 5, 2021 by tjb_altf4 1 Quote Link to comment
keymaster Posted March 5, 2021 Author Share Posted March 5, 2021 8 hours ago, tjb_altf4 said: Have you upgraded to 6.9.0 ? I've seen a slight improvement after upgrading (and a couple reboots).... now only 1 core pegged @ 100% 24/7 Hi Buddy Thank you so much for the update and keeping up with this, I am getting nowhere with, I have updated to stable yes, all it did was change the cores that are 100%. because its limiting my CPU I bought a Quadra card and followed Space Invaders latest video and now my Quadra is doing all the transcoding to my CPU is no longer going to flat out with only two people transcoding - but this is not a solution to the issue. Looking in HTOP and logs I can see that system is trying to run a lidarr.exe file from appdata not sure if this is it but not sure how to stop that. thanks K Quote Link to comment
keymaster Posted March 7, 2021 Author Share Posted March 7, 2021 (edited) Hi *update* bought new CPU and everything back to the way it should be. I am guessing that because previous CPU was a G model (can use on board graphics) and this one is not then that must have been the issue, although happy to be corrected. Thanks K Edited March 7, 2021 by keymaster added pic Quote Link to comment
psychoace Posted April 4, 2021 Share Posted April 4, 2021 I'm having this same problem with my 3400g right now. I'm assuming that it's not a coincidence. I could switch it out for a 2600x but I'd hope it would just get fixed. Quote Link to comment
keymaster Posted April 4, 2021 Author Share Posted April 4, 2021 Hi Switch it out and issue will be gone 100% K Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.