New2Unraid Posted February 10, 2021 Share Posted February 10, 2021 (edited) Hello There, Unfortunately I am not seeing the drives under Main configuration, I have 2 x 600GB Sas Drives and a few 70 + GB Sas Drives. I have attached my Diagnostics file, I am not very good with servers still learning however a friend who runs unraid and setup the drives correctly but he has too ran out of potential solutions. Any help would be wonderfully appreciated. tower-diagnostics-20210210-0011.zip Edited February 10, 2021 by New2Unraid Uploaded Diagnostics File Quote Link to comment
trurl Posted February 10, 2021 Share Posted February 10, 2021 Make sure you are not using any RAID mode. Unraid IS NOT RAID. Can you see the disks in the BIOS? Quote Link to comment
JorgeB Posted February 10, 2021 Share Posted February 10, 2021 If the drivers are connected to the HP raid controller use the LSI instead, though firmware should be updated when possible. Quote Link to comment
New2Unraid Posted February 10, 2021 Author Share Posted February 10, 2021 Thank you so much will try the above options. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.