February 12, 20215 yr Hey folks...using preclear for the first time with an 8tb drive in a USB 3 dock. It started fine but the status has been 'starting' for about 30 minutes. Is that normal? I know it will take many hours to complete and just wanted to make sure it is at least doing something before I hit the bed These are the only log entries so far... Feb 11 21:08:26 unraid kernel: sd 7:0:0:0: [sde] Synchronizing SCSI cache Feb 11 21:08:26 unraid kernel: sd 7:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 Feb 11 21:08:31 unraid kernel: sd 7:0:0:0: [sde] Spinning up disk... Feb 11 21:08:48 unraid kernel: sd 7:0:0:0: [sde] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) Feb 11 21:08:48 unraid kernel: sd 7:0:0:0: [sde] 4096-byte physical blocks Feb 11 21:08:48 unraid kernel: sd 7:0:0:0: [sde] Write Protect is off Feb 11 21:08:48 unraid kernel: sd 7:0:0:0: [sde] Mode Sense: 43 00 00 00 Feb 11 21:08:48 unraid kernel: sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 11 21:08:48 unraid kernel: sde: Feb 11 21:08:48 unraid kernel: sd 7:0:0:0: [sde] Attached SCSI disk DONE Edited February 12, 20215 yr by bclinton
Archived
This topic is now archived and is closed to further replies.