February 14, 20215 yr I've searched and found other threads relating to this but relevant, clear solution. Running 6.9-RC2 but I don't think it is explicitly due to that version because I've seen these entries in the log prior to 6.9. Setup is a OpnSense VM via a dedicated 4-port NIC. IPV6 works perfectly on the network, and all VMs/Dockers have internet access, etc... eth0 is on LAN 1 (X.X.1.XXX IP range) - A windows 10 VM uses this too. eth1 is on LAN 2 (X.X.2.XXX IP range) and has limited internet/network access (only enough for the dockers to work) Network settings shown, what is configured incorrectly which causes these entries? Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: failed to renew DHCPv6, rebinding Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: REPLY6 received from fe80::XXXX Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: adding address XXXX:154a/128 Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: renew in 1, rebind in 1, expire in 5494 seconds Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: failed to renew DHCPv6, rebinding Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: REPLY6 received from fe80::XXXX Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: adding address XXXX::154a/128 Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: renew in 1, rebind in 1, expire in 5493 seconds Edited February 14, 20215 yr by Interstellar
Archived
This topic is now archived and is closed to further replies.