Interstellar Posted February 14, 2021 Share Posted February 14, 2021 (edited) I've searched and found other threads relating to this but relevant, clear solution. Running 6.9-RC2 but I don't think it is explicitly due to that version because I've seen these entries in the log prior to 6.9. Setup is a OpnSense VM via a dedicated 4-port NIC. IPV6 works perfectly on the network, and all VMs/Dockers have internet access, etc... eth0 is on LAN 1 (X.X.1.XXX IP range) - A windows 10 VM uses this too. eth1 is on LAN 2 (X.X.2.XXX IP range) and has limited internet/network access (only enough for the dockers to work) Network settings shown, what is configured incorrectly which causes these entries? Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: failed to renew DHCPv6, rebinding Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: REPLY6 received from fe80::XXXX Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: adding address XXXX:154a/128 Feb 14 21:30:26 BBDG-NAS dhcpcd[1746]: br0: renew in 1, rebind in 1, expire in 5494 seconds Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: failed to renew DHCPv6, rebinding Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: REPLY6 received from fe80::XXXX Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: adding address XXXX::154a/128 Feb 14 21:30:27 BBDG-NAS dhcpcd[1746]: br0: renew in 1, rebind in 1, expire in 5493 seconds Edited February 14, 2021 by Interstellar Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.