ONEILL Posted February 19, 2021 Share Posted February 19, 2021 (edited) Hi guys , i made the upgrade to the RC2 , due to my nvidia not working , its fine now , all good , but now i have another issue that i didnt had with 6.8.5 , my cpu temp is wrong says its on 96º and already saw a 110º , checked bios temp , and its fine on the 40 ish º , i have a threadripper , with and aorus board , and it shows the driver as : it87 k10temp , have unloaded it and rescan , and tried in ssh to check sensors , but cannot get the temp right , how can i fix this ?? Thank s Edited February 19, 2021 by ONEILL Quote Link to comment
Squid Posted February 19, 2021 Share Posted February 19, 2021 Sounds like in Settings -Display settings it's set to display Fahrenheit instead of Celcius Quote Link to comment
ONEILL Posted February 19, 2021 Author Share Posted February 19, 2021 Sorry , but i checked that its celcius Quote Link to comment
Squid Posted February 19, 2021 Share Posted February 19, 2021 Try cycling it and then applying. While I'm not saying that it's impossible for the mis-reporting, it's curious that your 40C the BIOS reports is ~104F that Unraid says it is. Quote Link to comment
ONEILL Posted February 19, 2021 Author Share Posted February 19, 2021 (edited) Its not F , its always Celsius , but its the wrong number , since its low on the bios , and was low before the update , after it its always 80 up for more , even if idling , so the problem must be drivers or wrong sensor data , but i dont see F , only see celsius should i try a reboot ?? Edited February 19, 2021 by ONEILL Quote Link to comment
ONEILL Posted February 19, 2021 Author Share Posted February 19, 2021 (edited) The bios temps Edited February 19, 2021 by ONEILL Quote Link to comment
ONEILL Posted February 23, 2021 Author Share Posted February 23, 2021 anyone got any ideias ?? , how can i fix this wrong report ?? Quote Link to comment
jpowell8672 Posted March 2, 2021 Share Posted March 2, 2021 Upgraded from 6.8.3 to 6.9 stable and I also have this problem of Temp reporting higher than it is. Quote Link to comment
ONEILL Posted March 3, 2021 Author Share Posted March 3, 2021 11 hours ago, jpowell8672 said: Upgraded from 6.8.3 to 6.9 stable and I also have this problem of Temp reporting higher than it is. Thank you for your feedback, hope it gets fixed. Quote Link to comment
DaSlinky Posted March 4, 2021 Share Posted March 4, 2021 BUMP, I'm getting the same issue. about had kittens when I looked at mine. checked the sensor, rebooted, still off. Mine normally reports in ~30°C Please Fix Quote Link to comment
SimonF Posted March 4, 2021 Share Posted March 4, 2021 (edited) 9 hours ago, DaSlinky said: Mine normally reports in ~30°C if you run command sensors what output do you get? Edited March 4, 2021 by SimonF Quote Link to comment
Big Dan T Posted March 5, 2021 Share Posted March 5, 2021 (edited) I'm hoping this is a tech issue as im having kittens with these readings on a Ryzen 3600 ! sensors k10temp-pci-00c3 Adapter: PCI adapter Tctl: +61.6°C CPU Temp: +61.6°C MB Temp: +47.2°C nvme-pci-0800 Adapter: PCI adapter Composite: +42.9°C (low = -273.1°C, high = +84.8°C) (crit = +84.8°C) Sensor 1: +42.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +49.9°C (low = -273.1°C, high = +65261.8°C) Edited March 5, 2021 by Big Dan T Quote Link to comment
JamesAdams Posted April 23, 2022 Share Posted April 23, 2022 Same probleme here, with my Ryzen 9 3950X the temp in the bios is 50°C and unraid show me 40°C Quote Link to comment
JamesAdams Posted April 23, 2022 Share Posted April 23, 2022 In windows VM, with 12/24 core in Cinebench multi core unraid show my 45°C, that impossible. Quote Link to comment
Squid Posted April 23, 2022 Share Posted April 23, 2022 7 minutes ago, JamesAdams said: Same probleme here, with my Ryzen 9 3950X the temp in the bios is 50°C and unraid show me 40°C Not going to disagree per se, but they are 2 different "environments" and can't be compared directly to each other 5 minutes ago, JamesAdams said: that impossible. Out of curiosity, why is it impossible? Quote Link to comment
JamesAdams Posted April 23, 2022 Share Posted April 23, 2022 2 minutes ago, Squid said: Not going to disagree per se, but they are 2 different "environments" and can't be compared directly to each other Out of curiosity, why is it impossible? Beaucause no cooler or watercooling is as efficient and in place I have a small cooler so the temperature is not the right one for sure Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.