Hi all!
Hope you're doing well, today I moved my unraid setup to a new machine, all went well but since I've done a parity check apparently Disk 2 has some read errors.

I've attached some diagnostics if anyone can perhaps have a look at them and let me know?
I actually am not sure what to look for exactly, and if the drive needs to be replaced, should I cancel the parity check or let it complete?
Any help would be greatly appreciated!
 

ST4000VN000-2AH166_WDH0E8GL-20210222-2127 parity (sdb).txt ST4000VN000-2AH166_WDH0E9N1-20210222-2127 disk3 (sdc).txt WDC_WD30EURS-73TLHY0_WD-WCC4N0160941-20210222-2127 disk1 (sde).txt WDC_WD30EURS-73TLHY0_WD-WMC4N0151773-20210222-2127 disk2 (sdd).txt

1 minute ago, CyberDeath said:

I've attached some diagnostics

Those are just the smart reports for some disks. The complete diagnostics would include all that plus syslog and many other things about your hardware and configuration.

 

Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread.

Sorry about that, newbie here.
I hope I've attached the correct ZIP file.

Thanks!

Kindes regards

tower-diagnostics-20210222-2204.zip

Run an extended SMART test on disk2.

 

Main - Array Devices - Disk 2 - Self-Test - SMART extended self-test

I ran a extended SMART test on Disk 2 and came out with "Completed without error"
I have attached the ZIP file with the SMART Test as well.

tower-smart-20210223-1042.zip

Feb 22 08:41:39 Tower root: Fix Common Problems: Other Warning: Background notifications not enabled

Be sure to setup Notifications to alert you immediately by email or other agent as soon as a problem is detected.

 

Feb 22 11:14:30 Tower kernel: mdcmd (43): nocheck Pause
Feb 22 11:14:30 Tower kernel: md: recovery thread: exit status: -4

Was that parity check ever completed?