Digitus DS-30104-1 card (Marvell 88SE9230) - Unraid unable to detect drives


TheFiuz

7 posts in this topic Last Reply

Recommended Posts

As the title states.

Unraid is unable to see *any* drive directly connected to the card.

 

-BIOS detects all the drives

-card boots fine on another machine with just OS drive attached on it

-iommu=pt is enabled in boot parameters

-virtualization on or off on the motherboard makes no difference at all.

-card is in supported list https://wiki.unraid.net/index.php/Hardware_Compatibility#PCI_SATA_Controllers

 

Diagnostics attached.

tower-diagnostics-20210223-1151.zip

Edited by TheFiuz
one detail missing
Link to post
38 minutes ago, TheFiuz said:

 

That is very old information as it says at the beginning.  It also says for unRaid v6 avoid anything with a Marvel based chipset.

 

Al the most recent Linux kernels seem to have trouble using Marvel based controllers.  Experience has shown they have a tendency to drop disks offline for no obvious reason.

 

Link to post
9 minutes ago, TheFiuz said:

So according to the supported chipsets mentioned above, is a Silverstone ECS06 (ASMedia ASM1166) recommended then?

Thanks.

 

Not sure about that card.  ASMedia is normally fine as long as there is no port multiplier on the board, but that board appears to have one.  @JorgeB might be able to weigh in on this and whether it matters?

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.