February 26, 20215 yr hey guys yesterday i got notified that disk 2 has been disabled i cant run a smart check as it says drive is spun down. i click spin up but nothing happens. i have copied the part from the diagnostics page. not sure what i can do other than buy a new drive. any help be amazing cheers tazserver-syslog-20210226-0829.zip
February 26, 20215 yr Community Expert Disk dropped offline, check connections and the disk should come back up after a power cycle, then run the SMART test.
February 26, 20215 yr Author Hey I will try that. System hasn't moved so not sure how cables can come loose. All I did was shut the system down before a storm came then booted up next day. It was unplugged so no chance of a spike Cheers
February 26, 20215 yr Community Expert Just the power cycle will likely bring the disk back (not a reboot), but might as well check/replace cables to rule them out.
February 26, 20215 yr Author How do I power cycle without reboot mate. will check cables tomorrow Cheers
February 26, 20215 yr Community Expert 36 minutes ago, Taza said: How do I power cycle without reboot mate. To reboot you don't need to power cycle, power cycling is shutting down the server, wait a few seconds, power back on.
March 2, 20215 yr Author Ok so I put new drive in and it was copying from parity and it failed so i have replaced the sata cable with new cable. The udma crc count from 2 to 12 and I went and ran the extended smart test and it came back interrupted by host... what Do I do now to try and get new drive to work. Will I need to pre clear it now that it's had data written to it Cheers
March 2, 20215 yr Community Expert 2 hours ago, Taza said: The udma crc count from 2 to 12 This suggests there's still a connection problem.
March 2, 20215 yr Community Expert Try a different one, or swap drives around and see if the issue remains with the port or drive.
March 2, 20215 yr Author Will that mess anything up in unraid If I change say drive 1 and put in that port? All 6 sata ports are used I've attached system logs Cheers tazserver-syslog-20210302-0931.zip
March 2, 20215 yr 12 minutes ago, Taza said: Will that mess anything up in unraid If I change say drive 1 and put in that port? All 6 sata ports are used Unraid identifies the drives by Serial Number, not HW ports. Not issue in switching two drives.
March 2, 20215 yr Author Just now, ChatNoir said: Unraid identifies the drives by Serial Number, not HW ports. Not issue in switching two drives. Ok cool mate Will try. Will it crash out if a good drive goes to that port that's playing up as the other drive doesn't have the data resynced to it? So sorry for all the questions
March 2, 20215 yr Author I'm leaning to the sata port died. If it has what pcie sata card that's plug n play Cheers
Archived
This topic is now archived and is closed to further replies.