March 5, 20215 yr After 4 years I have encountered my first errors and I am unclear if I need to pull and replace the drive immediately or not. My array health report came back as "[FAIL] - (disk has read errors) [NOK]" The drive is now listed with 118 errors from 4 days ago. That number has not increased since then. My scheduled parity check was completed with no issues. I pulled the SMART report, can see the errors, but I honestly have no idea what I am looking at. I am running 6.8.3 a Proliant ML10 v2. with 4 data drives, a parity drive and a SSD for cache. Just based on size (6TB), this drive was one of the next ones to be upgraded, but I wasn't in a rush. Should I accelerate my timeline and get this one out ASAP? SMART report attached, any thoughts or advice greatly appreciated. -P WDC_WD60EFRX-68L0BN1_WD-WX11D76NYLSE-20210305-0913.txt Edited March 5, 20215 yr by Pearl Solved
March 5, 20215 yr Looks like the cable got breathed on wrong. If it continues, reseat / replace cabling. Drive is fine
Archived
This topic is now archived and is closed to further replies.