Pearl Posted March 5, 2021 Share Posted March 5, 2021 (edited) After 4 years I have encountered my first errors and I am unclear if I need to pull and replace the drive immediately or not. My array health report came back as "[FAIL] - (disk has read errors) [NOK]" The drive is now listed with 118 errors from 4 days ago. That number has not increased since then. My scheduled parity check was completed with no issues. I pulled the SMART report, can see the errors, but I honestly have no idea what I am looking at. I am running 6.8.3 a Proliant ML10 v2. with 4 data drives, a parity drive and a SSD for cache. Just based on size (6TB), this drive was one of the next ones to be upgraded, but I wasn't in a rush. Should I accelerate my timeline and get this one out ASAP? SMART report attached, any thoughts or advice greatly appreciated. -P WDC_WD60EFRX-68L0BN1_WD-WX11D76NYLSE-20210305-0913.txt Edited March 5, 2021 by Pearl Solved Quote Link to comment
Squid Posted March 5, 2021 Share Posted March 5, 2021 Looks like the cable got breathed on wrong. If it continues, reseat / replace cabling. Drive is fine Quote Link to comment
Pearl Posted March 5, 2021 Author Share Posted March 5, 2021 Awesome Squid, thanks for the quick response. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.