March 7, 20215 yr Been having some issues with my server this past week. Got some UDMA CRC error messages on disk5 then it quickly disabled after that. I was able to successfully rebuild the data to that drive, then the same thing happened with disk2: udma crc errors then disk2 disabled. Only this time, the disk goes offline again as soon as I start the data rebuild process. The server has completed one data-read check, so I tried to rebuild existing disk2 again, but once more disk2 immediately disabled then paused a read-check. My assumption was the data cables are bad (they're pretty old at this point) but now concerned my drive may actually be bad. I've attached logs, I would appreciate any advice or suggestions. saidin-diagnostics-20210307-1646.zip
March 8, 20215 yr Community Expert Disk looks fine, replace the cables and try again, you should also update the LSI firmware since it's quite old.
March 8, 20215 yr Author Thank you for the reply, as soon as the cables come in I'll get them swapped and update the firmware.
Archived
This topic is now archived and is closed to further replies.