master.h Posted March 7, 2021 Share Posted March 7, 2021 Been having some issues with my server this past week. Got some UDMA CRC error messages on disk5 then it quickly disabled after that. I was able to successfully rebuild the data to that drive, then the same thing happened with disk2: udma crc errors then disk2 disabled. Only this time, the disk goes offline again as soon as I start the data rebuild process. The server has completed one data-read check, so I tried to rebuild existing disk2 again, but once more disk2 immediately disabled then paused a read-check. My assumption was the data cables are bad (they're pretty old at this point) but now concerned my drive may actually be bad. I've attached logs, I would appreciate any advice or suggestions. saidin-diagnostics-20210307-1646.zip Quote Link to comment
JorgeB Posted March 8, 2021 Share Posted March 8, 2021 Disk looks fine, replace the cables and try again, you should also update the LSI firmware since it's quite old. Quote Link to comment
master.h Posted March 8, 2021 Author Share Posted March 8, 2021 Thank you for the reply, as soon as the cables come in I'll get them swapped and update the firmware. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.