1 hour ago, Fuggin said:

Love this feature....now if we could just get a cell phone app!

Not using it, but there is a community mobile app :

 

 

2 hours ago, ChatNoir said:

Not using it, but there is a community mobile app :

 

 

I know about that one but I would prefer an app made by limetech.

I just performed a MAJOR update on my server hardware, new CPU, Mainboard, and smaller NIC. I spent HOURS getting it up and running to the point where it could serve the house as router (pfSense) and Media Streamer. Along with creating Users, Naming Shares, configuring Drive Mapping and installing some of my most used pluggins and creating my Hardware Centric Gaming VM. (You know, the important stuff)

And then I moved the key over to my new thumbdrive...

I assume it pulled my backup from "My Servers"?

Did I miss a warning?

It restore a backup of my flash drive destroying all my hard work and making the whole thing unusable...

Very frustrating.

1 hour ago, Arbadacarba said:

I assume it pulled my backup from "My Servers"?

Did I miss a warning?

It restore a backup of my flash drive destroying all my hard work and making the whole thing unusable...

 

I can assure you there is no code to restore a backup over an existing installation. The only way to get a backup is to download a zip file from the My Servers dashboard, there is nothing automatic.

 

1 hour ago, Arbadacarba said:

And then I moved the key over to my new thumbdrive...

 

Exactly what steps did you take to do this? If you copied the entire /config folder, that would have overwritten your settings. If you copied just the key file that would have been safe.

 

I had copied just the key file... I had installed from the USB Creator onto a new USB drive and registered the trial... Then installed my most important VM's and such. Then rebooted and was the victim of my own "cleverness". 

 

Rebooting with the trial key (which needs an internet connection to verify its validity and then start the array), on a system that houses it's own router in a VM, (which requires the Array to be started to run even though it's not, itself on the Array) might have been a poor choice.

 

I wonder... Was it the existing Appdata, System, and Domain folders that made it look like it had recovered? 

 

I might have jumped the gun and made an assumption. My appologies if so.

 

My real goal here is to get rid of the Cruft, that I have created over the past year of customizations to the Go file etc. for my old system.

 

Of course mixed into all of this is troubleshooting a few little hardware conflicts on the new system.

 

Thanks for the response

I have this situation, but the server is running well.

I will try to restart the API and I let you know if is going good or not.

4 hours ago, Dondo70 said:

I have this situation, but the server is running well.

I will try to restart the API and I let you know if is going good or not.

 

I'm am seeing the same thing.

3 minutes ago, interwebtech said:

 

I'm am seeing the same thing.

unraid-api restart

fixed it

21 hours ago, interwebtech said:

unraid-api restart

fixed it

Thanks

 

On 10/12/2021 at 8:12 AM, interwebtech said:

unraid-api restart

fixed it

Ran into the same issue but `unraid-api restart` doesn't resolve it. The flash backup also just says 'loading'. No errors in the log. No browser/console errors. Adblock and such are disabled.

32 minutes ago, Craig Dennis said:

Ran into the same issue but `unraid-api restart` doesn't resolve it. The flash backup also just says 'loading'. No errors in the log. No browser/console errors. Adblock and such are disabled.

Would you please remove the My Servers plugin and reinstall it? Pay attention to the wall of text  on the install screen, it will alert you if there are any DNS issues that need to be resolved.

 

If flash backup continues to have issues, please see the release notes from yesterday:
   https://forums.unraid.net/topic/112073-my-servers-releases/?tab=comments#comment-1043427

 

After a few reboots it seems to have suddenly started working

hi i just noticed my backup of flash was not up to date. i have removed and installed the plugin again. but still get: 

hi there.

 

my servers is showing an error "not connected to mothership"

what i tried so far but still unsuccessful:

rebooted the server

re-install the my servers plugin

tried unraid-api restart

 

in settings remote access is enabled and port forwarding show it is able to access from outside.

 

dubugging shows this

 

☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
libvirt: No changes detected.
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
libvirt: No changes detected.
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
☁️ RELAY:200:OK:RECONNECTING:NOW
libvirt: No changes detected.
☁️ RELAY:200:OK:RECONNECTING:NOW

 

anything else i could do to resolve this?

thank you

 

edit

resolved after another reboot. false alarm. thanks

Edited October 25, 20214 yr by i1mran92

Wanted to throw in that the plugin would not stay signed in after it updated and when I went to the plugin config the page kept refreshing when trying to pull the flash backup status.

 

I used the above mentioned command unraid-api restart and it fixed the issue.

 

 

Enabling remote access is a nice feature, but I use wireguard for that and Im very happy with it.

 

However, what would be really needed to improve the current state of remote access, is a web-interface variant that is designed for and renders correctly on mobile devices.

 

It is past time that this is added, without any crutches like 3rd-party Apps etc.

Edited November 2, 20214 yr by sir_storealot

I'm having the same issue, but none of the fixes have worked for me. I am getting the "not connected to mothership" error in the top right drop down menu. My server is functioning fine other than this issue.

 

I have tried the following:

-rebooted numerous times

-ran unraid-api restart command numerous times, both before and after a reboot

-uninstalled and re installed My Servers plugin

 

I'm at a loss as to what to do now.

 

We've identified a potential cause for the issue and are working on a fix.

For some reason when I try and sign in, a pop up appears, i sign in fine, then the window closes, but it still tell sme to sign in!!

 

Edit, I manually deleted the plugin as it didnt show up, and couldnt install, and now everything seems to be wrking

 

Edited November 5, 20214 yr by clowrym

Please add the feature for local flash backup, rather then online flash backup.

I'm aware there's the CA Appdata Backup / Restore plugin available currently, but it's also deprecated since 6.9.

I uninstalled the plugin since I would like to revert back so I can access my server with the good old local ip address.

I went through the unstinstallation process but when I type in my local ip adress in my browser, it is still going through the DNS.

 

What did I miss?

 

Thanks!

9 minutes ago, mathgoy said:

What did I miss?

https://wiki.unraid.net/My_Servers#How_to_disable_SSL_for_local_access

today i was on my unRaid Server remotly and everything worked fine.

in the upper right corner i saw, i wasnt logged in?! (but was before last time i was on my server a few days ago)

without thinking alot about that i just signed in and now my Server is listet offline and i cant reach it anymore from here at work.

 

i´m on RC2 

Edited November 15, 20214 yr by Meannekes

So I was wondering, does this work if you haven't started the array? (ie stuff like dockers dont work until then)

I was just wondering as I have it set in case of power loss for it to restart on power, but I need to log-in to start the array, would this let me do this remote?

 

14 minutes ago, Necrotic said:

So I was wondering, does this work if you haven't started the array? (ie stuff like dockers dont work until then)

I was just wondering as I have it set in case of power loss for it to restart on power, but I need to log-in to start the array, would this let me do this remote?

 

 

When you say "this", are you referring to the optional Remote Access feature of My Servers? Yes it does work without the array being started.