Woodpusherghd Posted March 13, 2021 Share Posted March 13, 2021 One of my WD Red HDs was disabled due to write errors. Could this be due to cabling, power connection issues? The drive is less than 2 years old. In any event, a new drive is on its way. I've attached a smart report. Thanks. WDC_WD20EFRX-68EUZN0_WD-WCC4M7KKJXRN-20210312-2251.txt Quote Link to comment
JorgeB Posted March 13, 2021 Share Posted March 13, 2021 Disk looks clean, most likely not a disk problem, diags could give more clues. Quote Link to comment
Woodpusherghd Posted March 13, 2021 Author Share Posted March 13, 2021 27 minutes ago, JorgeB said: Disk looks clean, most likely not a disk problem, diags could give more clues. Diagnostics attached. Thanks. tower-diagnostics-20210313-0702.zip Quote Link to comment
JorgeB Posted March 13, 2021 Share Posted March 13, 2021 Looks more like a connection/power issue, replace/swap cables to rule them out and you can rebuild on top, just make sure the emulated disk is mounting and contents look correct before doing it. Quote Link to comment
Woodpusherghd Posted March 13, 2021 Author Share Posted March 13, 2021 Thanks. I'll check the cabling, I guess vibrations could have loosened something as I haven't been tinkering around with the server. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.