TGP Posted March 13, 2021 Share Posted March 13, 2021 Hello, I am looking for a way to repair the Unraid 6.9.X configuration for hdparm. Is there a way to get acess to the way how spindown commands are made and to what drives exactly? Especially I want to bring back the standby mode for SSDs which was removed without explanation (at least I didn't find one) and I want to get it back on my own. The command via console is still working fine, but it is not send to SSDs anymore, when HDDs are spinning down. Thanks in advance Quote Link to comment
SimonF Posted March 16, 2021 Share Posted March 16, 2021 You need to discuss with Limetech as the change has been made in the core system. I did post in the announcement that I suggest it should be parameterized to allow. This is from the release notes. - avoid sending spinup/spindown to non-rotational devices @limetechis there a way that @TGPcan spin down their SSDS? Quote Link to comment
TGP Posted March 16, 2021 Author Share Posted March 16, 2021 (edited) Thank you for your help. Especially when there are multiple Pools, not all of them run VM's or Dockers. Also some SSDs like Optane can be very powerhungry, even more when using a lot of them. Edited March 16, 2021 by TGP Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.