March 15, 20215 yr I try to connect my Elgato capture cards to my VM win10 but as soon as I do that my Unraid crashes and doesn't boot anymore. I have to do the vfio cfg and delete the bind entries. Unraid then starts normally again. Quote Model: Custom M/B: ASUSTeK COMPUTER INC. ROG ZENITH EXTREME Version Rev 1.xx - S/N: 170807722400444 BIOS: American Megatrends Inc. Version 2001. Dated: 07/31/2019 CPU: AMD Ryzen Threadripper 1950X 16-Core @ 3400 MHz HVM: Aktiviert IOMMU: Aktiviert Cache: 1536 KiB, 8 MB, 32 MB Arbeitsspeicher: 128 GiB DDR4 (maximal installierbar 512 GiB) Netzwerk: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mbps, full duplex, mtu 1500 eth1: 10000 Mbps, full duplex, mtu 1500 Kernel: Linux 5.10.21-Unraid x86_64 OpenSSL: 1.1.1j Quote Elgato HD60 Pro IOMMU group 26:[12ab:0380] 06:00.0 Non-VGA unclassified device: YUAN High-Tech Development Co., Ltd. Device 0380 Elgato 4K60 Pro IOMMU group 35:[12ab:0371] 0c:00.0 Multimedia controller: YUAN High-Tech Development Co., Ltd. Device 0371 IOMMU group 36:[12ab:0371] 0d:00.0 Multimedia controller: YUAN High-Tech Development Co., Ltd. Device 0371 IOMMU group 37:[12ab:0371] 0e:00.0 Multimedia controller: YUAN High-Tech Development Co., Ltd. Device 0371 IOMMU group 38:[12ab:0371] 0f:00.0 Multimedia controller: YUAN High-Tech Development Co., Ltd. Device 0371 Can someone help me? Edited March 15, 20215 yr by TryPaco
Archived
This topic is now archived and is closed to further replies.