RBoots Posted March 17, 2021 Share Posted March 17, 2021 I've been using Binhex DelugeVPN with Sonarr, Radarr, Lidarr and Jackett all routing their internet through the Deluge docker for a couple months. A couple weeks ago, it stopped working. Sonarr, Radarr and Lidarr are no longer connecting to Jackett or Deluge. I don't remember changing any settings or if there was an update recently, I just noticed one day that nothing was being added to Deluge. I tried a slightly different route by using an openvpn docker and routing everything through that instead, but still nothing. If I disable the vpn and set each docker network type to 'Bridge' everything seems to connect as they should. For obvious reasons, I don't want to do it this way. Could anyone help me out on what could be going on? I currently have openvpn setup with a nordvpn account. I can check my public IP as well as ping google, so I would assume it has proper internet connection. Each docker container that is using openvpn is connected by setting the network type to 'None' with the argument --net=container:openvpn. Those also have the same public IP as well as internet access. But for some reason something seems to be blocking the connection to each other docker container. I don't even know if this is an issue with the docker containers or if I need to do something different on my network I hope I did a good enough job explaining what my issue is, any help is appreciated. Quote Link to comment
Ericjr Posted March 17, 2021 Share Posted March 17, 2021 Check the forum, binhex had to make a change to the deluge container and you need to change your sonar/radar to local host. details are in the comments near the end Quote Link to comment
RBoots Posted March 18, 2021 Author Share Posted March 18, 2021 19 hours ago, Ericjr said: Check the forum, binhex had to make a change to the deluge container and you need to change your sonar/radar to local host. details are in the comments near the end That wasn't related to the issue I had. I was actually planning on switching over to running everything through a dedicated vpn docker instead of using the deluge vpn. The issue I was having was specifically related to sonarr and radarr being unable to connect the indexers to jackett. However, I just solved it by changing the url I get from jackett torznab to be 'localhost' instead of using my actual IP address. Thanks for your help though. I think it did, in some way, point me in the right direction. 1 Quote Link to comment
Beaupnm Posted April 10, 2021 Share Posted April 10, 2021 To save some people digging through forum comments, this comment was the solution for me. Quote I had to add my Unraid server's IP in both Sonarr and Radarr under Settings > General > Proxy > "Addresses for the proxy to ignore This is described in Q26 in the documentation here: https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md Hopefully this helps! 3 Quote Link to comment
Nath2125 Posted March 17, 2022 Share Posted March 17, 2022 quite new to this but how are people now connecting radarr and sonarr together with a vpn container and running it all through that vpn? i've been trying a few things myself but doesnt seem to work? Im running delugevpn container atm linked with my nordvpn (Openvpn) account and it runs fine but it seems i need to link radarr and sonarr with it cause it wont pick it up otherwise. Quote Link to comment
morglum Posted January 2, 2023 Share Posted January 2, 2023 (edited) On 4/10/2021 at 2:14 PM, Beaupnm said: To save some people digging through forum comments, this comment was the solution for me. Hopefully this helps! this helped me today - thanks! for future googler, my error was : Prowlarr url is invalid, Radarr cannot connect to Prowlarr btw this also solved being unable to connect to deluge. Edited January 2, 2023 by morglum Quote Link to comment
Sinister Posted November 19, 2023 Share Posted November 19, 2023 On 3/17/2021 at 10:53 PM, RBoots said: That wasn't related to the issue I had. I was actually planning on switching over to running everything through a dedicated vpn docker instead of using the deluge vpn. The issue I was having was specifically related to sonarr and radarr being unable to connect the indexers to jackett. However, I just solved it by changing the url I get from jackett torznab to be 'localhost' instead of using my actual IP address. Thanks for your help though. I think it did, in some way, point me in the right direction. Can you share what the torznab feed should look like ? i cant find anything in the documentation that describes what this should look like. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.