February 16, 201115 yr I am very new to unRAID but I am having a few problems. I have my drives online and the array built. I am joined to my domain using AD permissions and I have the following: 1. my user shares show up in the //TOWER folder but they are not accessible. 2. two of my disks are not accessible disk1 and disk2 I can not figure out this problem for the life of me any help would be much appreciated. Please bear in mind I am new and may need steps spelled out a little more then usual. My network is working correctly. EST001 pings to 192.168.2.1 this also happens when you use the direct 192.168.2.1 with no DNS or WINS. syslog attached bing281 syslog-2011-02-15.txt
February 16, 201115 yr Author well so far I have taken out 3 hard drives and only kept the WD20EARS. I have completely reinstalled unRAID. I have run initconfig and done a new parity check and now I wait.
February 16, 201115 yr Author After the parity check with the security turned to simple the array is working good. I now need to start putting in more settings and see if it will hold. I don't want to leave this thread hanging in case someone else has a similar problem.
February 21, 201115 yr Author I figured out the problem. Basically you need to set up everything before starting the array for the first time. Please see my post for a detailed explanation of what I am talking about: unRaid NAS Server Setup
October 26, 201213 yr So what do you do if you already have 12TB of data and want to switch to active directory?
Archived
This topic is now archived and is closed to further replies.