[SOLVED] About the newly added disk


9 posts in this topic Last Reply

Recommended Posts

The disk array composed of the first two disks, now I bought a new hard disk and added it (total 3 pieces). The space will also be displayed normally, and the disk letter is disk 2, but disk 2 cannot be displayed in the disk selection in the sharing, only the previous disk 1 is displayed. Check it on the primary disk and find that disk 2 does not have any indexes. Now disk1 is almost full, and disk2 has not been written. How can I solve this problem? ?

前两个磁盘组成的磁盘阵列,现在我购买了一个新硬盘并添加了它(共3块)该空间也将正常显示,并且磁盘字母为磁盘2,但是在共享中的磁盘选择中无法显示磁盘2,仅显示前一个磁盘1。在主磁盘上检查它,发现磁盘2没有任何索引。现在disk1快满了,没有写过disk2。我怎么解决这个问题??

1.png

2.png

3.png

Edited by joeqin
Link to post
On 3/19/2021 at 6:33 PM, gberg said:

What do yo umean by "disk 2 cannot be displayed in the disk selection in the sharing"?

Picture two, only disk1 can be seen, but I do have disk2

图二,只能看到disk1,但是我确实有disk2

Link to post

Disk2 doesn't have any files yet. Have you written any new files to your server since you installed disk2?

 

Also, appdata, domains, system shares are on the array. Normally you want these on cache and set to stay on cache so your dockers / VMs won't have performance affected by parity, and so array disks can spin down since these shares always have files open.

Link to post
Posted (edited)
1 hour ago, trurl said:

Disk2 doesn't have any files yet. Have you written any new files to your server since you installed disk2?

 

Also, appdata, domains, system shares are on the array. Normally you want these on cache and set to stay on cache so your dockers / VMs won't have performance affected by parity, and so array disks can spin down since these shares always have files open.

Since the installation of disk2, there have been reads and writes, and only writes to disk1. The APP function and VM are useless, because they are not needed, only the array function and the domain function are used.

自安装disk2以来,一直都有读写,也只会写到disk1上,APP功能和VM没有用,因为不需要,只用了个阵列功能和域功能

1.png

Edited by joeqin
Link to post
16 minutes ago, trurl said:

Go to Settings - Global Share Settings and set Included disks to All.

The problem was successfully solved according to your method, thank you very much!

按照你的方法成功解决问题了,万分感谢!

Link to post
  • JorgeB changed the title to [SOLVED] About the newly added disk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.