CPU load while copying files from RAID (1 HDD+1P) to SATA HDD


Recommended Posts

I am wondering a liitle why while copying lots of music (within unraid) using mc on the shell the CPU load under the tab dashboard shows a combined CPU load of 70% (4 cores combined). Using System Stats the CPU load seems to be around 20%. at the same time.

 

One thing is: Why do the two CPU infos differ that much and second: does the SATA driver (what ever does this in the kernel) have a poor performance, meaning burning lots of electricity while moving data?

 

I copy via shell on unraid from SATA disk RAID (1 Parity + 1 DAta Disk) to a SATA mounted EXT4 HDD (attached to a, how do you say, internal "swap cage"). All devices are plugged to the onboard controller on Intel C246 Chipset.

While not copying files the CPU load shown under tab dashboard  varies typically between 8%-15%.

 

Machine: ThinkSystem ST50, Processor: Xeon E2224G / Chipset Intel C246, 40GB RAM

CPU load while copying files from RAID (1 HDD+1P) to SATA HDD

Edited by RinxKninks
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.