March 24, 20215 yr Hello I have an HP Gen 8 microserver (all specs below) running UnRaid which mostly just shares files to my Plex server but also holds my music collection (played via Sonos) and photo library. I've also got two other computers, an i5 Plex server (running ubuntu) which also has a Minecraft server and a third PC workstation that rarely gets used. I do most of my work on a Mac, not from the server, but that's not the point of this question. I want to get rid of the three (old) computers and replace it with one Unraid box which can share files, run Plex and Minecraft (Both low bandwidth) but also VM a windows machine when needed. My current HP Microserver obv doesn't have the ability to run windows which i use from time to time - or run Plex etc. I can repurpose tech from my existing machines i think i just need a case, processor, cooling fan and RAM. Ive got screens/keyboard/mouse and extra hardware as below. Can anyone suggest a processor and motherboard please? ECC would be good and onboard graphics. One reason I'm not repurposing my PC workstation is that it doesn't have onboard graphics which causes a problem with Unraid. Existing 'spare' hardware EVGA 750W GQ power supply 3x Noctua NF-S12A 120mm fans 2x 480Gb Sandisk plus SSD 1x 240Gb Sandisk Plus SSD AMD Sapphire RX580 8Gb Card Equipment playing to repurpose: 4x3Tb WD Reds 8Gb Nvidea GTX 1070 SC (undecided if i want AMD or NVidea yet) LSI Disk Controller Intel dual NIC 4 port USB HP Microserver Gen 8 running Unraid 6.9.1 Celeron CPU G1610T @ 2.30GHz (2 core) 4Gb ECC Memory Dual Gigabit (and Unused ILO) 4x 3Tb Wd Red Drives approx 30% full 120Gb SSD Cache Running Krusder, PiHole & Duck DNS Dockers, no VMs Serves shares to Mac, PC & Plex server, not heavy traffic Standalone HP machine (Optiplex 7010) running Ubuntu 20.04.1 LTS i5-3470 CPU @ 3.20GHz (4 core) 8Gb Memory (non ECC) Single Gigabit 160Gb SSD Running Plex server, Minecraft server (2 users) and VNC HP400 workstation Xeon W3680 3.33Ghz (6C 12T) 480Gb SSD sandisk ssd plus 24Gb ECC RAM (6x 4gb) DVD Drive intel pro 1000 dual networking D33682 LSI SAS 2008 Falcon Many thanks, I'm getting confused with choices.
March 25, 20215 yr Author Yes that would work except I wouldn't want anything rack mounted. It's just I had alot of kit spare I could repurpose so went down the motherboard/processor route. Guess I could just sell it. I'll look into equivalent tower servers like the one you suggested. An ML350 perhaps. Thanks for the suggestion
April 10, 20215 yr Author Im thinking: Supermicro X10SLL-F Micro-ATX Motherboard with a Xeon 1240L v3 (or v4) and 16Gb ECC RAM. I can get that at a decent price. Its got Dual Gb NIC, IPMI and enough USBs I get 8 threads, at 25W TDP, all i need. Ive got an Nvidea 1070 and an AMD 580 to passthrough for a VM Ive got 4 WD 3TB Drives (all i need) and multiple SSDs for Cache/VM Ive got a power supply and fans. Im pretty sure i can find a Micro ATX case with support for 6 drives.
April 14, 20215 yr Author I've purchased a Supermicro X10SLL-F with an 8 thread Xeon and 32GB ECC. Ive flashed the HBA (An LSI SAS 2912) Im just waiting for delivery of my Fractal R6 then ill move everything over. Regards the UnRaid USB and Hard drives (4x 3.5 3TB WD Reds [1 parity, 3 data] and 1x SSD) how do you move them over? Is it simply a case of move them all over and reboot? I can obv set the fixed IP to be the same etc, its the drives i dont know what to do with. Edited April 14, 20215 yr by wobblewoo
April 14, 20215 yr 1) make sure your current config is NOT set to auto start the array. 2) note the position of each drive, as listed in unRAID. cross-reference with the serial# on each disk if needed. TAKE SPECIAL NOTE OF PARITY! 3) move the disks and flash drive to the new machine and boot. 4) your array will most likely be all wrong. do a new config, assign the disks as they were before, and ESPECIALLY THE PARITY! 5) if you did it right, you can tag the parity as VALID, and go on with your life. otherwise, you can rebuild parity, but only AFTER you verify all your data drives are present and populated.
April 16, 20215 yr Author Notes taken of all the drives many thanks. How do i do a new config? What does that mean? Do you just mean assign the drives like they were before: Parity > WDC_WD30EFRX_XXXXXXXXX1 (sdc) Disk 1 > WDC_WD30EFRX_XXXXXXXXX2 (sdb) Disk 2> WDC_WD30EFRX_XXXXXXXXX3 (sdd) etc And verify all the data - you mean look on the drive? Many thanks.
Archived
This topic is now archived and is closed to further replies.