March 24, 20215 yr I was upgrading Disk 2 with a 12 TB drive from a 3 TB and it stuck on 76.5%. I was unable to cancel or pause the parity rebuild and unable to shutdown or reboot so I had to hard power it down. Upon restart Disk 2 is showing as emulated (but I think all the data had already copied) and now Disk 5 is showing missing. The drive is physically there and I think I was able to see it in devices but Unraid does not see it to be able to add to array. How hosed am I? Is there a way to get Disk 5 visible so I can finish the rebuild and then replace Disk 5? Or probably do a new configuration and I get whatever rebuilt on Disk 2 and lose Disk 5? Please advise, diagnostics is attached. Thanks in advance. r720-diagnostics-20210324-1343.zip
March 24, 20215 yr Community Expert disk5 is failing SMART: device is NOT READY (e.g. spun down, busy) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. Try replacing the cables, if it's the same it's likely a failing disk.
March 24, 20215 yr Author 11 minutes ago, JorgeB said: disk5 is failing SMART: device is NOT READY (e.g. spun down, busy) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. Try replacing the cables, if it's the same it's likely a failing disk. It's a Dell server so I can't replace cables but I can try moving the drive to another slot. Is there a way to bypass the SMART?
March 25, 20215 yr Community Expert 12 hours ago, nolberg said: I can try moving the drive to another slot. Do that. 12 hours ago, nolberg said: Is there a way to bypass the SMART? SMART not working is a sign there's a problem, no point in trying to bypass it.
Archived
This topic is now archived and is closed to further replies.