Nicodem Posted March 25, 2021 Share Posted March 25, 2021 (edited) Hi esata tower for 5 disks. 4 other HDDs visible (2t/2tb/250gb/750gb) and this one not. System - QNAP TS-459 with Unraid newest version. 4 drives built in and 5 drives with esata tower. Used this hardware config for few years and with original QNAP software it worked without any issues and this disk was visible. I even booted now with QNAP - all good. Only unraid does not see it? Any ideas why? How I can try to check logs for what is going on? Edited March 25, 2021 by Nicodem Quote Link to comment
JorgeB Posted March 25, 2021 Share Posted March 25, 2021 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
Nicodem Posted March 25, 2021 Author Share Posted March 25, 2021 So it seems that its not hot-swap in my configuration. I restarted Unraid and at same time of boot started whole esata array and now its visible. nas-459-diagnostics-20210325-1739.zip Quote Link to comment
JorgeB Posted March 25, 2021 Share Posted March 25, 2021 So it's working now? Also note that SATA port multipliers are not recommended with Unraid, you may run into more issues in the future. Quote Link to comment
Nicodem Posted March 25, 2021 Author Share Posted March 25, 2021 Now yes. This SATA multiplier worked for me OK for years at QNAP so this should be OK. Anyway - only NTFS mounted there. Array will be built at the internal 4 drives. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.