arturovf Posted April 23, 2021 Share Posted April 23, 2021 (edited) Can someone tell us how is it working? adding the options i915 force_probe=4c8a options i915 enable_guc=2 Will provide full hw transcoding support? what works and what don't?? Edited April 23, 2021 by arturovf spelling Quote Link to comment
xXx Posted April 26, 2021 Share Posted April 26, 2021 UHD730: options i915 force_probe=4c8b Quote Link to comment
arturovf Posted April 26, 2021 Share Posted April 26, 2021 Thank you @xXx, can you tell me Plex-wise what is working and what isn't? I mean I guess tonemapping is not yet working right? Quote Link to comment
xXx Posted April 26, 2021 Share Posted April 26, 2021 9 minutes ago, arturovf said: Gracias @xXx, ¿puedes decirme a nivel de Plex qué funciona y qué no? Quiero decir, supongo que el mapeo de tonos aún no funciona, ¿verdad? HDR No.. Quote Link to comment
ProXM1 Posted May 5, 2021 Share Posted May 5, 2021 Hi, I'm kind of a newbie in here and to further complicate things, I recently bought an Intel 11500 for my Unraid server. Can I enable the iGPU for Plex transcoding within the Stable version (6.9.2) or do I need to be on the beta version? If so, could anybody guide me on the process? Thank you, Quote Link to comment
lukerv4 Posted May 9, 2021 Share Posted May 9, 2021 (edited) On 4/26/2021 at 1:47 PM, xXx said: HDR No.. On 4/26/2021 at 1:37 PM, arturovf said: Thank you @xXx, can you tell me Plex-wise what is working and what isn't? I mean I guess tonemapping is not yet working right? Hardware accelerated HDR Tonemapping is working as of Plex version: 1.23.0.4497. Weird graphics glitches still occur if using HDR Tonemapping below the 1080p HD High setting I'm running an Intel i5 11400 with a UHD 730 On 5/5/2021 at 10:27 AM, ProXM1 said: Hi, I'm kind of a newbie in here and to further complicate things, I recently bought an Intel 11500 for my Unraid server. Can I enable the iGPU for Plex transcoding within the Stable version (6.9.2) or do I need to be on the beta version? If so, could anybody guide me on the process? Thank you, 1. Create a file on your UNRAID flash drive under /boot/config/modprobe.d called i915.conf 2. paste the following code in the conf file you created options i915 force_probe=4c8a options i915 enable_guc=2 3. Reboot your server and you should be able to turn on Plex transcoding in your docker No need to update your UNRAID version Edited May 9, 2021 by lukerv4 added stme steps for the other user to get them up and running with their new CPU 1 Quote Link to comment
xXx Posted May 9, 2021 Share Posted May 9, 2021 (edited) opciones i915 force_probe = 4c8b opciones i915 enable_guc = 2 en mi caso es. b Es UHD 730 . Edited May 9, 2021 by xXx Quote Link to comment
ProXM1 Posted May 11, 2021 Share Posted May 11, 2021 On 5/9/2021 at 1:01 PM, lukerv4 said: No need to update your UNRAID version Got it up and running! Thank you so much! 1 1 Quote Link to comment
Rick Sanchez Posted May 15, 2021 Share Posted May 15, 2021 What spec systems are you running?Sent from my TA-1004 using Tapatalk Quote Link to comment
Kaizac Posted May 18, 2021 Share Posted May 18, 2021 Many 4K movies now play with HDR tonemapping using HW transcoding. But unfortunately also many don't and show artifacts. I really hope it's a Linux kernel issue. Was just switching over to a full 4K library. For now tonemapping stays off. This is on a 11500. 1 Quote Link to comment
cracyfloyd Posted May 20, 2021 Share Posted May 20, 2021 thnx a lot for this topic. my intern graphics intel i5 11400 runs now for plex hw transcoding. the only one what i found out is that the direct connected server monitor goes black. the command prompt is no more visible. any solution for that? Quote Link to comment
arturovf Posted May 24, 2021 Share Posted May 24, 2021 want to request full support (4k HDR hw transcoding) Quote Link to comment
SimonF Posted May 24, 2021 Share Posted May 24, 2021 1 hour ago, arturovf said: want to request full support (4k HDR hw transcoding) in Plex? Wouldn't that be down to Plex to add support? 1 Quote Link to comment
arturovf Posted May 24, 2021 Share Posted May 24, 2021 They say their part is completed? https://forums.plex.tv/t/anyone-have-been-able-to-hw-transcode-on-an-intel-nuc-11-iris-xe/695381/66 Quote Link to comment
fahmietalife Posted May 29, 2021 Share Posted May 29, 2021 (edited) On 5/10/2021 at 1:01 AM, lukerv4 said: . Create a file on your UNRAID flash drive under /boot/config/modprobe.d called i915.conf 2. paste the following code in the conf file you created options i915 force_probe=4c8a options i915 enable_guc=2 3. Reboot your server and you should be able to turn on Plex transcoding in your docker No need to update your UNRAID version Hi i really need help. I'm using Intel i5-11500 and I've done as instructed but unraid will not boot and will get stuck at "switching to inteldrmfb from efi vga" and will just stuck there forever Edited May 29, 2021 by fahmietalife Quote Link to comment
fahmietalife Posted May 29, 2021 Share Posted May 29, 2021 Update: i have to remove the thumbdrive and plug in to my laptop and manually remove i915.conf file, then i am able to boot to unraid. Appreciate someone that can advise me as i really need hardware transcoding to work. Quote Link to comment
SimonF Posted May 29, 2021 Share Posted May 29, 2021 2 hours ago, fahmietalife said: Update: i have to remove the thumbdrive and plug in to my laptop and manually remove i915.conf file, then i am able to boot to unraid. Appreciate someone that can advise me as i really need hardware transcoding to work. What do you get for your GPU on lspci, i.e. 00:02.0 VGA compatible controller: Intel Corporation Device 9ba8 (rev 03 Quote Link to comment
fahmietalife Posted May 29, 2021 Share Posted May 29, 2021 3 hours ago, SimonF said: What do you get for your GPU on lspci, i.e. 00:02.0 VGA compatible controller: Intel Corporation Device 9ba8 (rev 03 00:00.0 PCI bridge: Intel Corporation Device 4c53 (rev 01) 00:02.0 VGA compatible controller: Intel Corporation Device 4c8a (rev 04) 00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller 00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller 00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM 00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi 00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] 00:1b.0 PCI bridge: Intel Corporation Device 06c2 (rev f0) 00:1b.4 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #21 (rev f0) 00:1c.0 PCI bridge: Intel Corporation Device 06bc (rev f0) 00:1c.5 PCI bridge: Intel Corporation Comet Lake PCIe Port #6 (rev f0) 00:1d.0 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #9 (rev f0) 00:1d.4 PCI bridge: Intel Corporation Device 06b4 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device 0684 00:1f.3 Audio device: Intel Corporation Device f1c8 00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller 00:1f.5 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH SPI Controller 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (11) I219-V 05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 02) 06:00.0 Non-Volatile memory controller: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive (rev 03) Quote Link to comment
SimonF Posted May 29, 2021 Share Posted May 29, 2021 36 minutes ago, fahmietalife said: 00:00.0 PCI bridge: Intel Corporation Device 4c53 (rev 01) 00:02.0 VGA compatible controller: Intel Corporation Device 4c8a (rev 04) 00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller 00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller 00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM 00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi 00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] 00:1b.0 PCI bridge: Intel Corporation Device 06c2 (rev f0) 00:1b.4 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #21 (rev f0) 00:1c.0 PCI bridge: Intel Corporation Device 06bc (rev f0) 00:1c.5 PCI bridge: Intel Corporation Comet Lake PCIe Port #6 (rev f0) 00:1d.0 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #9 (rev f0) 00:1d.4 PCI bridge: Intel Corporation Device 06b4 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device 0684 00:1f.3 Audio device: Intel Corporation Device f1c8 00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller 00:1f.5 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH SPI Controller 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (11) I219-V 05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 02) 06:00.0 Non-Volatile memory controller: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive (rev 03) did you try options i915 force_probe=4c8a in the file without options i915 enable_guc=2 Quote Link to comment
fahmietalife Posted May 29, 2021 Share Posted May 29, 2021 Just now, SimonF said: did you try options i915 force_probe=4c8a in the file without options i915 enable_guc=2 Yes i did that, still the same. Quote Link to comment
SimonF Posted May 29, 2021 Share Posted May 29, 2021 29 minutes ago, fahmietalife said: Yes i did that, still the same. Have you set any of the bios options for iGPU? I dont have 11th Gen, this is the log I have for my CPU. May 29 20:45:19 computenode kernel: fb0: switching to inteldrmfb from EFI VGA May 29 20:45:19 computenode kernel: Console: switching to colour dummy device 80x25 May 29 20:45:19 computenode kernel: i915 0000:00:02.0: vgaarb: deactivate vga console May 29 20:45:19 computenode kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem May 29 20:45:19 computenode kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) May 29 20:45:19 computenode kernel: [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 May 29 20:45:19 computenode kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) May 29 20:45:19 computenode kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 May 29 20:45:19 computenode kernel: fbcon: i915drmfb (fb0) is primary device May 29 20:45:19 computenode kernel: Console: switching to colour frame buffer device 480x135 May 29 20:45:19 computenode kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device May 29 20:45:19 computenode root: May 29 20:45:19 computenode root: ---Intel Kernel Module successfully enabled!--- This is loaded via the intel gpu top plug rather than the file. You could try just dry run loading the i915 module from the command line. modprobe -n i915 You will need to specify the options, modprobe -n i915 force_probe=4c8a try both options and look at the looks/command output. Quote Link to comment
fahmietalife Posted May 30, 2021 Share Posted May 30, 2021 7 hours ago, SimonF said: Have you set any of the bios options for iGPU? I dont have 11th Gen, this is the log I have for my CPU. May 29 20:45:19 computenode kernel: fb0: switching to inteldrmfb from EFI VGA May 29 20:45:19 computenode kernel: Console: switching to colour dummy device 80x25 May 29 20:45:19 computenode kernel: i915 0000:00:02.0: vgaarb: deactivate vga console May 29 20:45:19 computenode kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem May 29 20:45:19 computenode kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) May 29 20:45:19 computenode kernel: [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 May 29 20:45:19 computenode kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) May 29 20:45:19 computenode kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 May 29 20:45:19 computenode kernel: fbcon: i915drmfb (fb0) is primary device May 29 20:45:19 computenode kernel: Console: switching to colour frame buffer device 480x135 May 29 20:45:19 computenode kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device May 29 20:45:19 computenode root: May 29 20:45:19 computenode root: ---Intel Kernel Module successfully enabled!--- This is loaded via the intel gpu top plug rather than the file. You could try just dry run loading the i915 module from the command line. modprobe -n i915 You will need to specify the options, modprobe -n i915 force_probe=4c8a try both options and look at the looks/command output. I've look in my BIOS option (im using Gigabyte H470I AORUS PRO AX), there's only option to disable/enable iGPU and it's currently enable root@unraid01:~# modprobe -n i915 root@unraid01:~# modprobe -n i915 force_probe=4c8a root@unraid01:~# /dev/dri bash: /dev/dri: No such file or directory Quote Link to comment
SimonF Posted May 30, 2021 Share Posted May 30, 2021 3 hours ago, fahmietalife said: I've look in my BIOS option (im using Gigabyte H470I AORUS PRO AX), there's only option to disable/enable iGPU and it's currently enable root@unraid01:~# modprobe -n i915 root@unraid01:~# modprobe -n i915 force_probe=4c8a root@unraid01:~# /dev/dri bash: /dev/dri: No such file or directory -n is a dryrun so wont create any /dev/dri, but do you get any error output when you run the commands or syslog entries. You can run without -n, but suggest you stop the array just in case you need to do a hard reset. Quote Link to comment
fahmietalife Posted May 30, 2021 Share Posted May 30, 2021 10 hours ago, SimonF said: -n is a dryrun so wont create any /dev/dri, but do you get any error output when you run the commands or syslog entries. You can run without -n, but suggest you stop the array just in case you need to do a hard reset. I'm not getting any error output when i ran the command, same goes in syslog. Quote Link to comment
fahmietalife Posted June 1, 2021 Share Posted June 1, 2021 Today i update to latest BIOS firmware version May 2021 from Gigabyte website, but still having the same issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.