ds123 Posted April 10, 2021 Author Share Posted April 10, 2021 22 minutes ago, itimpi said: Common ways are: from the command line using Midnight Commander (‘mc’ command) or some other tool such as rsync. This is probably the fastest. from a docker container such as Krusader. Gives good graphical interface. over the network from your favorite Client OS. If I use option #1 which is the fastest? Is it possible to track the progress from another session (web gui session / ssh session)? Quote Link to comment
trurl Posted April 10, 2021 Share Posted April 10, 2021 Midnight Commander gives progress indicators. rsync will too if you use the correct options. MC is going to be easier to figure out unless you already know how to use rsync at the command line. Quote Link to comment
ds123 Posted April 10, 2021 Author Share Posted April 10, 2021 (edited) why can't I mount my qnap drives? I installed the Unassigned Devices plus plugin I'm getting this error - Mount of '/dev/sdb5' failed. Error message: mount: /mnt/disks/322: unknown filesystem type 'linux_raid_member'. Edited April 10, 2021 by ds123 Quote Link to comment
SimonF Posted April 10, 2021 Share Posted April 10, 2021 Looks like drives are part of a raid set and not readable as a standalone drive. Data will be spread across all volumes. Quote Link to comment
ds123 Posted April 10, 2021 Author Share Posted April 10, 2021 27 minutes ago, SimonF said: Looks like drives are part of a raid set and not readable as a standalone drive. Data will be spread across all volumes. Ok... so I need to tranfser over the LAN Quote Link to comment
ds123 Posted April 10, 2021 Author Share Posted April 10, 2021 Started the transfer using NFS + Krusader, speed seems good Quote Link to comment
ds123 Posted April 17, 2021 Author Share Posted April 17, 2021 On 4/4/2021 at 12:56 AM, itimpi said: in principle that plan should work. One step you have omitted is a step 5a where you use Tools->New Config to reset the array to an uninitialised state so you can now assign the 14TB as parity and the data drives as you want them. When you start the array the data drives will be left with their contents intact and unRaid will start building parity on the 14TB drive. Just make sure that you have cleared all data off the 14TB drive as building parity will completely over-write its contents. When assigning the 14TB as parity, is it safe to reorder the data disks and change their current assingnments? Quote Link to comment
itimpi Posted April 17, 2021 Share Posted April 17, 2021 1 minute ago, ds123 said: When assigning the 14TB as parity, is it safe to reorder the data disks and change their current assingnments? After using New Config you can reorder the disks with no problems as long as you are not going to assume parity remains valid. unRaid will build parity based on the assignments at the point you start the array. 1 Quote Link to comment
ds123 Posted April 19, 2021 Author Share Posted April 19, 2021 The migration process has been completed succefully! Thank you all for your help! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.