Flubster Posted April 7, 2021 Share Posted April 7, 2021 I've got a 2 drive Cache pool in btfs RAID1 HP Ilo is now reporting predictive failure (Its Power On Hours are @ 44035 (5 years eek! - SSD has done well!) which I suspect has annoyed ilo! - Have purchased a replacement drive - same size. I have read the FAQ and want to check the process is still valid - Mount new HDD into Server (I do have enough spare ports to have them both connected at same time) Stop Array Swap failing cache drive with new drive in array config Start Array Wait for btfs balance - when complete "stop array" will become live. Stop Array - Halt Server - Physically Remove failing disk Move New Drive into correct bay Up Server. Start Array. Sound right? Do I need to do any formatting of the new drive in any way? Do I need to force a balance? Also as its a new drive (SSD) not sure if I need to worry about the SSD 6.9 reformatting MBR? as the other RAID1 drive will not have the MBR in the newer location. (Also a SSD) Dave (Most likely overthinking!) Quote Link to comment
JorgeB Posted April 7, 2021 Share Posted April 7, 2021 FAQ is still correct, but pool replacement is broken in v6.9.x: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.