Squid Posted July 27, 2021 Share Posted July 27, 2021 8 minutes ago, salvdordalisdad said: Suggestions welcome. You want to post in the Unassigned Devices plugin's support thread to let @dlandon know about that. Quote Link to comment
salvdordalisdad Posted July 27, 2021 Share Posted July 27, 2021 1 minute ago, Squid said: You want to post in the Unassigned Devices plugin's support thread to let @dlandon know about that. Ta Quote Link to comment
lovswr Posted August 5, 2021 Share Posted August 5, 2021 Just wanted to say I just upgraded to 6.9.2 with no problems. I never had a password for root (or any of my other selves as users) but I set one (for root & one user) just before I upgraded. Whole process took about 7 minutes or so. Quote Link to comment
Compass Posted August 27, 2021 Share Posted August 27, 2021 I'm on 6.2.2, when I 'check for updates' on the plugins page no update is available for unRaid OS, what am I doing wrong?(besides not updating earlier🤔) Quote Link to comment
Compass Posted August 29, 2021 Share Posted August 29, 2021 (edited) On 8/27/2021 at 11:24 AM, Compass said: I'm on 6.2.2, when I 'check for updates' on the plugins page no update is available for unRaid OS, what am I doing wrong?(besides not updating earlier🤔) Ok, once I read the first post properly(its like a test really isn't it....read the friggin question!), anyway, it's installed and seems to be running fine, only it hasn't asked me to set a root password and all my shares are exported, yet according to the bottom paragraph from the first post, thats not what should happen. Edited August 29, 2021 by Compass Quote Link to comment
ChatNoir Posted August 29, 2021 Share Posted August 29, 2021 3 hours ago, Compass said: it hasn't asked me to set a root password I think that the "upon first webGUI access" means for new installations. Not your situation from what I understand. Version 6.10 (actually in RC) will impose the root password on updates too. Quote It is now mandatory to define a root password. Quote Link to comment
Compass Posted August 29, 2021 Share Posted August 29, 2021 6 hours ago, ChatNoir said: I think that the "upon first webGUI access" means for new installations. Not your situation from what I understand. Righto, thanks, it's not real clear on that Quote Link to comment
Unraid-arr Posted September 3, 2021 Share Posted September 3, 2021 (edited) Hi guys, Currently I am running 6.8.3. What is the current recommendation for Stable 24x7 running version. (I am running the Unraid Nvidia build, so direct upgrade is not possible and I would need to start from scratch.) Is waiting for 6.10.x worth it (to me it looks like it is around the corner) or should I make the leap to 6.9.2? Thanks for your thoughts. Edited September 3, 2021 by Shomil Saini Added more info Quote Link to comment
Squid Posted September 3, 2021 Share Posted September 3, 2021 15 hours ago, Shomil Saini said: Hi guys, Currently I am running 6.8.3. What is the current recommendation for Stable 24x7 running version. (I am running the Unraid Nvidia build, so direct upgrade is not possible and I would need to start from scratch.) Is waiting for 6.10.x worth it (to me it looks like it is around the corner) or should I make the leap to 6.9.2? Thanks for your thoughts. I think you should always be running the latest stable. Personally, my two production servers always run either the latest stable or the latest RC (whichever is newer). 1 Quote Link to comment
fearlessknight Posted October 12, 2021 Share Posted October 12, 2021 Upgraded to 6.9.2 and noticed my Windows VMs, Linux is fine, despite gpu pass through, operate very sluggishly. The CPUs pinned also run at high cores. They are fine at idle. I'm not sure what could be causing it. I also created a new VM with no luck.Swapped hardware and experience the same issue. Anyone else experience this? Quote Link to comment
DanielCoffey Posted October 13, 2021 Share Posted October 13, 2021 Since this is a Release Announcement thread, you mightl have a better chance of getting help if you raise a new thread in either the General Issues or KVM forums. Quote Link to comment
elcapitano Posted December 3, 2021 Share Posted December 3, 2021 On 7/23/2021 at 6:30 PM, ljm42 said: Not a lot to go on here, I'd suggest plugging a keyboard and monitor into the server so you can see what is shown on the screen during boot. Take a picture when the text stops scrolling and upload it here. Also try booting in safe mode to disable all of your plugins. Tried attaching a monitor, but no signal. Using the NVIDIA QuADro P2000. I tried all 4 outputs. Same result with the MB HDMI output. On 6.8.3. all is working just fine. Just no Video signal. Quote Link to comment
optiman Posted December 5, 2021 Share Posted December 5, 2021 On 9/3/2021 at 2:17 PM, Squid said: I think you should always be running the latest stable. Personally, my two production servers always run either the latest stable or the latest RC (whichever is newer). I tried 6.9.2 and my drives would not spin down. Therefore I rolled back to 6.9.1 and I 'm testing to makes sure the drives spin down like they should. If you are not worried about the drive spin down issue, then 6.9.2 may work for you. Quote Link to comment
csrihari Posted January 13, 2022 Share Posted January 13, 2022 (edited) Edit moving this comment to correct thread. Edited January 13, 2022 by csrihari Wrong thread Quote Link to comment
elcapitano Posted March 6, 2022 Share Posted March 6, 2022 Quick question. I am still on 6.8.3. Long story, but upgrading doesn't work. Would a clean install of 6.9.2 on my current USB stick + following this guide leave everything as is? Cheers Quote Link to comment
Squid Posted March 6, 2022 Share Posted March 6, 2022 All you basically have to do is download the zip file and then overwrite all of the bz* files on the flash drive with what's in the archive. Reboot Quote Link to comment
itimpi Posted March 6, 2022 Share Posted March 6, 2022 33 minutes ago, elcapitano said: Long story, but upgrading doesn't work. Why not (how does it fail)? It is likely that whatever issue you had would not be fixed by a clean install. Quote Link to comment
elcapitano Posted March 6, 2022 Share Posted March 6, 2022 1 hour ago, itimpi said: Why not (how does it fail)? It is likely that whatever issue you had would not be fixed by a clean install. Well, on 6.8.3, I have zero issues - except missing Squid's excellent community apps. It just doesn't boot after upgrading . . Nothing happens - nothing rolls over the screen. Just tried replacing the bz-files, same problem. Restoring to 6.8.3 makes everything work again . . . Quote Link to comment
Squid Posted March 6, 2022 Share Posted March 6, 2022 Does the blue boot menu appear? Re run the make_bootable script (as administrator), check the boot order. Quote Link to comment
elcapitano Posted March 6, 2022 Share Posted March 6, 2022 No boot menu . I have a suspicion that my MB is at fault.master-diagnostics-20220306-1333.zip Quote Link to comment
Squid Posted March 6, 2022 Share Posted March 6, 2022 More likely a flash problem. Transfer it to a new flash Quote Link to comment
elcapitano Posted March 6, 2022 Share Posted March 6, 2022 Thanks, I will try that . . Missing Community Apps Quote Link to comment
elcapitano Posted March 7, 2022 Share Posted March 7, 2022 On 3/6/2022 at 1:38 PM, Squid said: More likely a flash problem. Transfer it to a new flash Swapped out with a new flashdrive. Same problem. Ordered new MB . . Quote Link to comment
elcapitano Posted March 19, 2022 Share Posted March 19, 2022 So - finally I have some pictures of what's going on during boot. One picture is immediately after booting with 6.9.2. No GUI . . Next picture is 5 seconds later. root@MASTER:~# docker network ls NETWORK ID NAME DRIVER SCOPE 16dae0b9cb06 br0 macvlan local 3865e5074cdb bridge bridge local b4a5e3d425e4 host host local e78cd5f82a47 none null local b8031a6cf9ca proxynet bridge local Quote Link to comment
Squid Posted March 19, 2022 Share Posted March 19, 2022 Quote Model name: AMD Ryzen 9 3900X 12-Core Processor Have you done and looked at this: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.