It seems that starting from 6.9.2 sensors can't use k10temp to monitor the temperature.

 

CPU: RYZEN 4750G

Motherboard: ASUS B450M-PRO s

bar-diagnostics-20210415-1838.zip

Edited April 15, 20215 yr by Beermedlar

Unraid 6.9.2 works with k10temp with Raven Ridge (2000G-series) and Picasso (3000G-series) APUs so if there's a difference it's with Renoir (4000G-series), not with Unraid 6.9.2.

 

root@Pusok:~# sensors
amdgpu-pci-0900
Adapter: PCI adapter
vddgfx:           N/A  
vddnb:            N/A  
edge:         +38.0°C  

k10temp-pci-00c3
Adapter: PCI adapter
CPU Temp:     +38.2°C  
Tdie:         +38.2°C  

it8728-isa-0a40
Adapter: ISA adapter
in0:         984.00 mV (min =  +0.00 V, max =  +3.06 V)
in1:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.03 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.05 V  (min =  +0.00 V, max =  +3.06 V)
in4:           1.09 V  (min =  +0.00 V, max =  +3.06 V)
in5:         888.00 mV (min =  +0.00 V, max =  +3.06 V)
in6:           1.20 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.26 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.02 V  
Array Fan:   1516 RPM  (min =    0 RPM)
Array Fan:    770 RPM  (min =    0 RPM)
MB Temp:      +30.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +50.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +38.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = disabled
intrusion0:  ALARM

nvme-pci-0800
Adapter: PCI adapter
Composite:    +26.9°C  (low  = -273.1°C, high = +76.8°C)
                       (crit = +78.8°C)
Sensor 1:     +26.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +31.9°C  (low  = -273.1°C, high = +65261.8°C)