I Completely Screwed up unraid.


Recommended Posts

I saw that there was an update for Unraid, so I ran it. Because I'm tired I just went into "zone out" mode and I'm not sure what happened. I thought it finished, which is why I think I closed the popup dialog, but again, not sure.

 

After I closed the dialog, Unraid was still saying there was an update and some of the page wasn't rendering correctly. So I stupidly rebooting thinking (again, because I'm tired), oh, this must be like Windows and need to reboot after updating.

 

Well, now it won't start up. I cannot access it via SSH and cannot access it via WebGUi.

 

Did I just screw up my whole server? Since many of the settings are stored on the USB, is there a way that I can just reinstall the newest version and import all my old settings without the loss of data?

Link to comment
19 minutes ago, HoLyCoW said:

Is this a known issue with 6.9.2? What can I do to resolve this?

 

You are likely to get better informed feedback if you attach your systems diagnostics zip file (obtained via Tools->Diagnostics) to your NEXT post so we can see more about your configuration

Link to comment
1 hour ago, SimonF said:

Which controller do you have

 

Here's a list of my devices.... looks like I have a few. Not sure which ones are relavent:

IOMMU group 0:	[8086:1918] 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
IOMMU group 1:	[8086:1901] 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)
IOMMU group 2:	[8086:191d] 00:02.0 VGA compatible controller: Intel Corporation HD Graphics P530 (rev 06)
IOMMU group 3:	[8086:a12f] 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
	[8086:a131] 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
IOMMU group 4:	[8086:a13a] 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
	[8086:a13d] 00:16.3 Serial controller: Intel Corporation 100 Series/C230 Series Chipset Family KT Redirection (rev 31)
IOMMU group 5:	[8086:a102] 00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)
IOMMU group 6:	[8086:a110] 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)
IOMMU group 7:	[8086:a114] 00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)
IOMMU group 8:	[8086:a149] 00:1f.0 ISA bridge: Intel Corporation C236 Chipset LPC/eSPI Controller (rev 31)
	[8086:a121] 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
	[8086:a170] 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
	[8086:a123] 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
IOMMU group 9:	[8086:15b7] 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-LM (rev 31)
IOMMU group 10:	[104c:8240] 02:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
IOMMU group 11:	[1000:0097] 04:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02)

 

1 hour ago, itimpi said:

 

You are likely to get better informed feedback if you attach your systems diagnostics zip file (obtained via Tools->Diagnostics) to your NEXT post so we can see more about your configuration

I've included it now.

sal-9000-diagnostics-20210416-1046.zip

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.