April 21, 20215 yr Hi, New UNRAID user and coming up on end of first full week since first booting up into UNRAID. I started with a 32GB USB 2.0 SanDisk Cruzer Fit flash drive in the motherboard back I/O USB 2.0 port and after getting repeated flash device errors in UNRAID I bought a new 16GB version of the SanDisk Cruzer Fit (still USB 2.0 version) and after ~25 hours got another flash device error on the new flash drive. Attached is the diagnostic file for my build and hardware of the build is in my signature. I am really hoping someone can help me here as I am a new user and have been loving UNRAID for sheer storage space as this was to be my new 4K Plex Server (REMUX or bust haha) but need it to stay up for more than 24 hours at a time. My gut tells me I am doing something wrong at this point since I don't want to believe I got two bad flash drives in a row. But maybe I did just don't have 3rd drive to try at this time without ordering another. Only other planned hardware change I had in mind (if relevant for this flash device support) was that I also picked up a 2TB 970 EVO Plus m.2 drive to replace the 2x1TB 970 EVO m.2 cache drives since I didn't realize it would only net me 1TB usable space for cache/active downloads and I prefer capacity (again this could be due to user error). Docker and plugins screenshots attached along with main array screenshot. On the docker list the only ones I'm actually starting up are Krusader, binhex-delugevpn and Plex Media Server. The others I installed, tried to use, didn't get anywhere despite watching SpaceInvaderOne vids and they remain stopped until I have time to play with them more. Thanks! myunraid-diagnostics-20210421-1825.zip
Archived
This topic is now archived and is closed to further replies.