Getting 'yellow warnings' to respect drive temp settings (on 6.9.1)


6 posts in this topic Last Reply

Recommended Posts

I have a NVMe that I've set to warn at 140F but continue to get the 'Yellow Warning' that drive is hot (115F).  How can I get this warning to respect drive settings?  Is this a bug in 6.9.1?

Screenshot 2021-04-21 160549.png

Link to post

First, you should update to 6.9.2

 

If it still happens, then delete smart-one.cfg from /config on the flash drive, reboot and set things back up if necessary

Link to post
3 hours ago, Squid said:

First, you should update to 6.9.2

 

would love to...but when I did - drive spin down after timeout stopped happening...bug report submitted.

 

3 hours ago, Squid said:

If it still happens, then delete smart-one.cfg from /config on the flash drive, reboot and set things back up if necessary

 

the original smart-one.cfg seemed to have the correct information (and I have rebooted multiple times since originally changing/correcting the numbers).  Will try again - super appreciate the follow-up & response!

Ok...when I went back to update/change the numbers (changing them on the line and clicking 'Apply') - it doesn't seem to 'take' - they revert back to the original numbers after the 'Apply' is pressed and screen refreshes!  BUT looking at the file from the CLI shows the correct info in the file.  I guess it is just waiting for a reboot to show on the screen?

 

And such a weird thing....my 'Cache' drives are showing the temps in 'F' (which is what my system default is) but the 'Dev 1' drive (which is part of 'Unassigned Drives') is showing its information in Celsius?  (the correct information with my updated temps - but still different format)....I'm thinking that might be the issue?

 

Thanks again - dave

Link to post
Just now, ds679 said:

And such a weird thing....my 'Cache' drives are showing the temps in 'F' (which is what my system default is) but the 'Dev 1' drive (which is part of 'Unassigned Drives') is showing its information in Celsius?  (the correct information with my updated temps - but still different format)....I'm thinking that might be the issue?

 

OH....and another weird issue.....my Cache drive entries include their names....while the assigned drive entry does not?  Here is my new file:

 

root@Tower4:/boot/config# cat smart-one.cfg 
[GIGABYTE_GP-ASM2NE6100TTTD_SN202808919XXX]
GIGABYTE_GP-ASM2NE6100TTTD_SN202808919XXX_hotTemp="140"
GIGABYTE_GP-ASM2NE6100TTTD_SN202808919XXX_maxTemp="158"
at0="5"
at1="187"
at3="197"
at4="198"
at5="199"
[GIGABYTE_GP-ASM2NE6100TTTD_SN202808919XXX]
GIGABYTE_GP-ASM2NE6100TTTD_SN202808919XXX_hotTemp="140"
GIGABYTE_GP-ASM2NE6100TTTD_SN202808919XXX_maxTemp="158"
at0="5"
at1="187"
at3="197"
at4="198"
at5="199"
[Samsung_SSD_970_EVO_Plus_250GB_S4P3NG0M1159XXX]
hotTemp="60"
maxTemp="70"

Link to post

And just another follow-up.....after rebooting the GUI page for each drive shows non-corrected values (still the default ones) for all of my NVMe drives....BUT the CLI reading of the files shows the accurate/corrected values.

 

Something seems really broken?

Link to post
Posted (edited)

welp....I figured that 'time would tell' if those changes were successful.....the answer is no.

 

Just received the 'Yellow Warning' with the 115F temp (whereas the actual file shows correct/higher temp) and it is ignoring it.

 

Is it an 'Unassigned Devices' issue?  (UPDATE:  Nope....as it just happened to my other NVMe drive - yellow warning @ 115 and not the set temp)

 

-dave

Edited by ds679
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.