joecool169 Posted April 25, 2021 Posted April 25, 2021 Started a few weeks ago, all my vm's. I get a blank monitor with no signal until I get to the gui. I no longer see the titancore screen or the windows loading screen on startup. If I tell windows to boot into the uefi I just get no signal. When I start Arch Linux I have nothing until the password screen of the gui. The issue is I reinstalled Arch and now I can't really trouble shoot the passthrough because the screen doesn't work as soon as I add the gpu. Quote
joecool169 Posted April 25, 2021 Author Posted April 25, 2021 After much headache trying to figure this out I used spaceinvaders script and dumped my own vbios. This fixed the black screen issue. I can now access my vm bios by pushing esc at startup. I foolishly thought that because the vm somewhat worked and actually used to work with no vbios that this could not be my issue. I also thought that since I grabbed a vbios from tech power up that matched my card perfectly that was good enough. My advice : DUMP YOUR OWN VBIOS NO MATTER WHAT Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.