February 28, 201115 yr Download Let's try this again... Please read the Release Notes located on the unRAID wiki. In particular, uninstall or disable any 3rd party add-ons until the add-on author has verified correct operation with this release.
February 28, 201115 yr In my test machine, I had 2 80Gb disks, and 2 160Gb disks. The array was made with a 160Gb parity, and 2 80Gb for disk1 and disk2: I stopped the array and changed disk1 to a 160Gb: After I his start again. There is no disk1 in the list. The disk1 share is created and exported via smb. There is only one share exported which hada data on both disks. At the moment, the share only shows what was on the second disk. Parity check is running now... UPDATE: Completed. Syslog: http://pastebin.com/HmFMUr34
February 28, 201115 yr I'm still receiving segfaults when emhttp loads and have no access to the web gui. My syslog is attached. syslog_v5b5a.txt
February 28, 201115 yr I'm not having issues with general use, seems to be working fine with the latest version. I've removed the change you said would make emhttp load, as that didn't make a difference anyway.
February 28, 201115 yr So I made a fresh install of 5b5a, tinkered a bit and then copied my PRO.KEY to the flash (by SMB). The web server died on me. Below is the last bunch of log messages, and attached is the full syslog. I messed with the workgroup name, spindown time and the system time and timezone. I noticed the crash after I copied the key file. Feb 28 09:10:30 Tower emhttp: shcmd (132): rmmod md-mod 2>&1 |logger Feb 28 09:10:30 Tower emhttp: shcmd (133): udevadm settle Feb 28 09:10:30 Tower emhttp: Device inventory: Feb 28 09:10:30 Tower emhttp: ST31000333AS_9TE1MZ4Q (sdb) 976762552 Feb 28 09:10:30 Tower emhttp: Hitachi_HDS722020ALA330_JK1101B9GTTBSF (sda) 1953514552 Feb 28 09:10:30 Tower emhttp: WDC_WD5000AAKS-22TMA0_WD-WCAPW3478638 (sde) 488386552 Feb 28 09:10:30 Tower emhttp: Hitachi_HDS722020ALA330_JK11C1YAJLXWRV (sdf) 1953514552 Feb 28 09:10:30 Tower kernel: md: unRAID driver removed Feb 28 09:10:30 Tower emhttp: ST31000340AS_9QJ13D2F (sdc) 976762552 Feb 28 09:10:30 Tower emhttp: WDC_WD20EARS-00MVWB0_WD-WMAZA1422332 (sdd) 1953514552 Feb 28 09:10:30 Tower emhttp: Hitachi_HDS722020ALA330_JK1170YBJ1VYUD (sdg) 1953514552 Feb 28 09:10:30 Tower emhttp: Hitachi_HDS722020ALA330_JK1171YAGR8RHS (sdi) 1953514552 Feb 28 09:10:30 Tower emhttp: Hitachi_HDS722020ALA330_JK11C1YAJMH7KV (sdj) 1953514552 Feb 28 09:10:30 Tower emhttp: shcmd (134): modprobe md-mod super=/boot/config/super.dat slots=21 2>&1 |logger Feb 28 09:10:30 Tower emhttp: diskId.21 not found Feb 28 09:10:30 Tower kernel: md: unRAID driver 2.1.0 installed Feb 28 09:10:30 Tower kernel: read_file: error 2 opening /boot/config/super.dat Feb 28 09:10:30 Tower kernel: md: could not read superblock from /boot/config/super.dat Feb 28 09:10:30 Tower kernel: md: initializing superblock Feb 28 09:10:30 Tower kernel: mdcmd (1): import 0 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (2): import 1 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (3): import 2 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (4): import 3 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (5): import 4 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (6): import 5 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (7): import 6 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (: import 7 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (9): import 8 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (10): import 9 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (11): import 10 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (12): import 11 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (13): import 12 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (14): import 13 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (15): import 14 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (16): import 15 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (17): import 16 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (18): import 17 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (19): import 18 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (20): import 19 0,0 Feb 28 09:10:30 Tower kernel: mdcmd (21): import 20 0,0 Feb 28 09:10:30 Tower kernel: emhttp[1238]: segfault at 0 ip 08050566 sp bfdbad10 error 4 in emhttp[8048000+15000] syslog.zip
February 28, 201115 yr Tom, if you wanted to post up some IOCTL spinup/spindown code program trying different parameters or flags for an testing on the LSI1068E/BR10i controllers, I'm willing to try it out and report back the results.
February 28, 201115 yr I i had 5.0Beta5 and had to change my spindowndelay to "0" to boot my unraid back up. I did that. Now I've installed 5.0Beta5a, booted back up great, changed the hard drive spin down delay in the web config back to 1 hour. It's been 3-4 hours now and it has not spun down automatically. (Have not accessed any files off the unraid).
February 28, 201115 yr Tom, if you wanted to post up some IOCTL spinup/spindown code program trying different parameters or flags for an testing on the LSI1068E/BR10i controllers, I'm willing to try it out and report back the results. Is the ioctl driver perhaps needed in this situation? Would it help to include/load as a module? http://cateee.net/lkddb/web-lkddb/FUSION_CTL.html I noticed it's not being used. from the .config on 5.0b5a: # CONFIG_FUSION_CTL is not set
February 28, 201115 yr Has anything been done in this version that can break md5sum? I recall unMENU dling and installing the screen package fine on b4. Now I get md5 mismatches on that package and other packages I try to install. I want to believe that md5sum would be an app that wouldn't change interfaces over time, but I might be wrong. /Lars Olof
February 28, 201115 yr Has anything been done in this version that can break md5sum? I recall unMENU dling and installing the screen package fine on b4. Now I get md5 mismatches on that package and other packages I try to install. I want to believe that md5sum would be an app that wouldn't change interfaces over time, but I might be wrong. /Lars Olof md5sum works as usual in 5.0beta5a. I can still download as before in unMENU. Joe L.
February 28, 201115 yr Successfully upgraded from v5b4 and all is working as expected. Thanks Tom! John
February 28, 201115 yr md5sum works as usual in 5.0beta5a. I can still download as before in unMENU. Joe L. I can confirm this now after testing. Still don't know what was failing for me, though...
February 28, 201115 yr Interesting new issue that cropped up. Tom/others, if you can confirm? I've wiped my config directory and tried from a fresh configuration, still the same issue: 1) From the main unRAID screen, click on any of the disks to view the disk settings 2) Try turning on or off AFP or SMB export 3) Click Apply 4) It should revert back to whatever it was set to before. I can't turn off or on any AFP/SMB disk export, it simply doesn't "apply" the changes. I believe 5.0-beta4, this was fine.
February 28, 201115 yr What does this mean: - webGui: no more <defunct> processes resulting from computing share disk usage. Is it still unwise for me to use this on my live server?
February 28, 201115 yr What does this mean: - webGui: no more <defunct> processes resulting from computing share disk usage. When computing the share size via the GUI it would leaved <defunct> process. You could see them via a ps -ef on the command line. Basically they were not cleaned up and now they are.
February 28, 201115 yr Is it still unwise for me to use this on my live server? If it says "Beta" or "RC" in the name, then do not use it in a live production environment, unless you like playing with fire in a diked hydrazine storage area.
February 28, 201115 yr Got to work this morning and put beta-5a on a VM (clean, right from zip) and was unable to modify the disk export status for either AFP or SMB.
February 28, 201115 yr Got emhttp to load, but after adding a cache drive the web page crashed again. Server is still up and running and all disk shares seem to be functioning.
February 28, 201115 yr Tried to turn off sharing of SMB on disk 5 and the emhttp crashed as well. everything else seems to work just attached my syslog syslog-20110228-140633.txt.zip
February 28, 201115 yr Installed 5.0-beta5a to flash and booted. I have one drive on integrated, one on BR10i and one on another adapter. I added the drives to the drop down list on main (I really like it being there). All three drives displayed temps (yeah on BR10i support). The array didn't start automatically and says will do parity sync when started (cool). 1. I clicked spin down button. Two drives spun down, the one on the BR10i didn't spin down. From console I used hdparm -y to spin it down which worked. I was going to spin it back up but since the array hasn't started yet there aren't any disks in /mnt yet. 2. I started the array which spun up all drives and temps are showing for all drives again. Just to retest...stopping sync and clicking spin down, the drive on BR10i did not spin down. syslog.zip
February 28, 201115 yr Author In my test machine, I had 2 80Gb disks, and 2 160Gb disks. ... Thanks for the info & syslog, this bug is fixed in 5.0-beta5b.
February 28, 201115 yr Author I'm still receiving segfaults when emhttp loads and have no access to the web gui. My syslog is attached. This is the offending line in the syslog: Feb 27 21:48:16 UNRAID emhttp: HOME not found It's crashing because there is no internal variable named 'HOME'. Are you running a completely stock version of unRAID (ie, no add-ons). If so, please copy the contents of your Flash device to your PC, zip and email as attachment to [email protected]. There is no personal info in any of those files, except for the names of your user shares, users, and passwords (though the passwords are encrypted - if you prefer you can omit files config/passwd and config/smbpasswd).
February 28, 201115 yr Author So I made a fresh install of 5b5a, tinkered a bit and then copied my PRO.KEY to the flash (by SMB). The web server died on me. Below is the last bunch of log messages, and attached is the full syslog. I messed with the workgroup name, spindown time and the system time and timezone. I noticed the crash after I copied the key file. Did you Stop array, copy key file, then re-boot array? Or just copy key file? If the latter, try the former and post back if it works.
February 28, 201115 yr Author I i had 5.0Beta5 and had to change my spindowndelay to "0" to boot my unraid back up. I did that. Now I've installed 5.0Beta5a, booted back up great, changed the hard drive spin down delay in the web config back to 1 hour. It's been 3-4 hours now and it has not spun down automatically. (Have not accessed any files off the unraid). It works for me. You're sure the 'Default spin down delay' is set to '1 hour' on the Disk Settings page? And if you go to the individual disk pages, 'Spin down delay' is set to 'Use default'?
February 28, 201115 yr Minor suggestion that before creating the bzroot file, clean up all ".jedbackup" directories under the /usr/local/emhttp/plugins and /etc/ hierarchies.
Archived
This topic is now archived and is closed to further replies.