damnshaneisthatu Posted April 26, 2021 Share Posted April 26, 2021 Win10 VM was working fine prior to upgrade. Now, when I attempt to start the VM, my monitor goes into Power Save mode, and the VM pauses. Seeing this in the logs when attempting to start up VM: 2021-04-26T20:13:03.926942Z qemu-system-x86_64: vfio: Cannot reset device 0000:0e:00.1, depends on group 22 which is not owned. Group 22 IOMMU attached. PCIe ACS override set to "Multi-function". Any insight would be helpful. Thanks! Quote Link to comment
bastl Posted April 27, 2021 Share Posted April 27, 2021 (edited) On 4/26/2021 at 10:30 PM, damnshaneisthatu said: Seeing this in the logs when attempting to start up VM: 2021-04-26T20:13:03.926942Z qemu-system-x86_64: vfio: Cannot reset device 0000:0e:00.1, depends on group 22 which is not owned. Make sure you passthrough all parts for the GPU. The GPU itself i guess group20, the Nvidia Audio Controller group21 and the Nvidia USB Controller group22 Edit: I forgot group23 is also part from your GPU Edited April 29, 2021 by bastl Quote Link to comment
damnshaneisthatu Posted May 1, 2021 Author Share Posted May 1, 2021 Yep, I thought I had it edited correctly in the XML, but still running into the issue. Quote Link to comment
SimonF Posted May 1, 2021 Share Posted May 1, 2021 24 minutes ago, damnshaneisthatu said: Yep, I thought I had it edited correctly in the XML, but still running into the issue. What does your system devices on tools tab look like? GPU should be ticked, this is my K4000. 1 Quote Link to comment
dvd.collector Posted May 6, 2021 Share Posted May 6, 2021 I had exactly the same problem and raised a thread on here. No updates, so rolled back to 6.8.3. Quote Link to comment
damnshaneisthatu Posted May 6, 2021 Author Share Posted May 6, 2021 On 5/1/2021 at 1:04 PM, SimonF said: What does your system devices on tools tab look like? GPU should be ticked, this is my K4000. Ahhh... mine are unticked. Will update mine later this evening. Appreciate the tip! Anything else I should look out for? Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 On 5/1/2021 at 1:04 PM, SimonF said: What does your system devices on tools tab look like? GPU should be ticked, this is my K4000. Yeah, still getting this after ticking all IOMMU groups. Quote Link to comment
SimonF Posted May 7, 2021 Share Posted May 7, 2021 (edited) 15 minutes ago, damnshaneisthatu said: Yeah, still getting this after ticking all IOMMU groups. Just to confirm you have ticked 20,21,22 and 23? rebooted and you still have the issue? Edited May 7, 2021 by SimonF Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 5 minutes ago, SimonF said: Just to confirm you have ticked 20,21,22 and 23? rebooted and you still have the issue? Correct. Do I need to edit my XML? Quote Link to comment
SimonF Posted May 7, 2021 Share Posted May 7, 2021 Shouldn't need to should just need to add them to the VM. Can you provide screen print similar to this. Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 22 minutes ago, SimonF said: Shouldn't need to should just need to add them to the VM. Can you provide screen print similar to this. Ah yes, 00.3 was unchecked. Now I'm getting a "Unknown PCI header type '127'" error. 😂 Quote Link to comment
SimonF Posted May 7, 2021 Share Posted May 7, 2021 9 minutes ago, damnshaneisthatu said: Ah yes, 00.3 was unchecked. Now I'm getting a "Unknown PCI header type '127'" error. 😂 Untick both nvidia usb devices and just have gpu and sound defined. Try that to see if vm boots Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 2 minutes ago, SimonF said: Untick both nvidia usb devices and just have gpu and sound defined. Try that to see if vm boots No go. Still getting the '127'. Quote Link to comment
SimonF Posted May 7, 2021 Share Posted May 7, 2021 27 minutes ago, damnshaneisthatu said: No go. Still getting the '127'. Can you screen print the gpu allocation are you using a vbios? Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 48 minutes ago, SimonF said: Can you screen print the gpu allocation are you using a vbios? Yes. Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 Seeing this on boot. Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 Still erroring. Quote Link to comment
damnshaneisthatu Posted May 7, 2021 Author Share Posted May 7, 2021 Received "vfio: Unable to power on device, stuck in D3" without vbios, both NVIDIA usb devices ticked. Quote Link to comment
damnshaneisthatu Posted May 20, 2021 Author Share Posted May 20, 2021 On 5/6/2021 at 7:05 AM, dvd.collector said: I had exactly the same problem and raised a thread on here. No updates, so rolled back to 6.8.3. how did you roll back? Quote Link to comment
damnshaneisthatu Posted August 24, 2021 Author Share Posted August 24, 2021 Still no luck Quote Link to comment
wkbenpao Posted September 18, 2021 Share Posted September 18, 2021 does the promble is solved? Quote Link to comment
sheldz8 Posted September 18, 2021 Share Posted September 18, 2021 You must modify your VM settings to use the new versionSent from my SM-A305F using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.