sota Posted July 14, 2021 Share Posted July 14, 2021 I was gonna try and upgrade the plotters, but at this point i'm not going to bother. the last 2 drives will be filled in 3 days max. After that they're getting shut down for good. the 2nd NR12000 comes on friday. so by monday, I'm purely in farming mode. 96TB, 864 plots. 13 sh!tcoins so far. I think I'm going to split them completely; no network sharing; each will have all sh!tcoins loaded, and running 432 plots each. I've seen some notes about it improving odds slightly, as it improves PPF response times. I'm not interested in the complexity of setting up harvesters for all these forks, so I'll just stick with totally separate installs. Also means if one box breaks, it only takes out half my plots until it's fixed. Quote Link to comment
sota Posted July 14, 2021 Share Posted July 14, 2021 (edited) so any other forks out there? Avocado Chaingreen Chia ChiadogeCoin DogeChia Equality Flax Flora GreenDoge Goji HDDcoin Kale Melati Sector Seno Silicoin Socks Spare Taco Wheat Edited July 19, 2021 by sota 6 )%($%) times to get this right! Quote Link to comment
TexasUnraid Posted July 14, 2021 Share Posted July 14, 2021 8 hours ago, sota said: so any other forks out there? Avocado Chaingreen Chia DogeCoin Flax Flora GreenDoge Goji HDDcoin Kale Seno Silicoin Spare You got a bunch more then me right now. I am missing Avocado DogeCoin Flora GreenDoge Happen to have links to these? It is so hard to find links to these things on google for some reason. Think I decided to stick with solo plots for now since chia is a bust and the forks are the only reason I am still farming. Going to add a few more drives to the farm for a little while as well. Quote Link to comment
sota Posted July 14, 2021 Share Posted July 14, 2021 1 hour ago, TexasUnraid said: You got a bunch more then me right now. I am missing Avocado DogeCoin Flora GreenDoge Happen to have links to these? It is so hard to find links to these things on google for some reason. Think I decided to stick with solo plots for now since chia is a bust and the forks are the only reason I am still farming. Going to add a few more drives to the farm for a little while as well. edited post. Quote Link to comment
TexasUnraid Posted July 14, 2021 Share Posted July 14, 2021 (edited) Fantastic, thanks for that! Adding the missing blockchains now and letting them sync. I noticed that Kale is not syncing from the other day, is it working for you? Started those others syncing, my CPU is crying lol. I am also up to 20gb of ram used as well. Gonna guess your swap file is getting one heck of a workout. Edited July 14, 2021 by TexasUnraid Quote Link to comment
sota Posted July 14, 2021 Share Posted July 14, 2021 (edited) yea i'm gonna have to go buy a bunch more ram for these boxes I guess. it's starting to exhibit the slowdown issues I saw earlier, from the memory getting overloaded. for kale: 82.62.243.118:6333 try connecting to that also, wheat refuses to connect for some reason. if you get it going, past a connection here, please. eta: I think wheat is a mess. Edited July 14, 2021 by sota Quote Link to comment
sota Posted July 14, 2021 Share Posted July 14, 2021 https://wiproo.com/a-comprehensive-list-of-active-chia-forks/ Quote Link to comment
TexasUnraid Posted July 14, 2021 Share Posted July 14, 2021 8 hours ago, sota said: yea i'm gonna have to go buy a bunch more ram for these boxes I guess. it's starting to exhibit the slowdown issues I saw earlier, from the memory getting overloaded. for kale: 82.62.243.118:6333 try connecting to that also, wheat refuses to connect for some reason. if you get it going, past a connection here, please. eta: I think wheat is a mess. Odd, just noticed that the only ip kale is trying to connect to it 127.0.0.1 and if I try to add that one it just never adds. Quote Link to comment
sota Posted July 15, 2021 Share Posted July 15, 2021 2 hours ago, TexasUnraid said: Odd, just noticed that the only ip kale is trying to connect to it 127.0.0.1 and if I try to add that one it just never adds. 82.62.243.118 80.180.129.95 37.229.174.83 37.120.61.118 47.243.163.133 83.23.214.192 176.37.91.177 65.24.170.48 80.99.168.23 174.112.137.191 91.126.120.146 184.170.242.210 106.122.184.43 109.110.86.166 123.11.45.120 220.141.200.193 49.49.27.233 118.137.86.28 that's the nodes my kale has connected to. port 6333 Quote Link to comment
sota Posted July 15, 2021 Share Posted July 15, 2021 unrelated, might have to piss off the wife soon, and take a drive to just outside chicago, for a car. Quote Link to comment
TexasUnraid Posted July 15, 2021 Share Posted July 15, 2021 I used to go through 4-5 cars a year. Find it cheap, fix it up, get offered more then I paid and move on to the next one lol. Allowed me to drive a lot of nice cars though, had my driveway full of RX7's, 300ZX, MR2, Supras etc for a few years, all modded of course. Quote Link to comment
TexasUnraid Posted July 15, 2021 Share Posted July 15, 2021 (edited) Decided to fill up a few 4tb drives I found and playing with another server and the latest madmax plotter. I put 256gb of ram in the system and turns out if you have nothing else running it is JUST enough to plot 100% in memory. at peak I had 2.5gb free. This system is a bit more powerful with 2x 10c/20t CPU's and it allowed me to get under the 30 min barrier! 27 mins to be exact Number of Threads: 40 Number of Buckets P1: 2^9 (512) Number of Buckets P3+P4: 2^9 (512) Working Directory: /media/chia/ramdisk/ Working Directory 2: /media/chia/ramdisk/ [P1] Table 1 took 12.2723 sec [P1] Table 2 took 120.279 sec, found 4294841903 matches [P1] Table 3 took 133.992 sec, found 4294868118 matches [P1] Table 4 took 144.466 sec, found 4294707806 matches [P1] Table 5 took 143.048 sec, found 4294550428 matches [P1] Table 6 took 140.253 sec, found 4294161353 matches [P1] Table 7 took 112.145 sec, found 4293318965 matches Phase 1 took 806.491 sec [P2] max_table_size = 4294967296 [P2] Table 7 scan took 7.45923 sec [P2] Table 7 rewrite took 37.6718 sec, dropped 0 entries (0 %) [P2] Table 6 scan took 27.0937 sec [P2] Table 6 rewrite took 37.4811 sec, dropped 581375547 entries (13.5387 %) [P2] Table 5 scan took 27.1478 sec [P2] Table 5 rewrite took 36.2057 sec, dropped 762024300 entries (17.744 %) [P2] Table 4 scan took 24.4502 sec [P2] Table 4 rewrite took 36.3529 sec, dropped 828898653 entries (19.3005 %) [P2] Table 3 scan took 25.147 sec [P2] Table 3 rewrite took 37.2155 sec, dropped 855139219 entries (19.9107 %) [P2] Table 2 scan took 23.8146 sec [P2] Table 2 rewrite took 36.876 sec, dropped 865568216 entries (20.1537 %) Phase 2 took 378.158 sec Wrote plot header with 268 bytes [P3-1] Table 2 took 35.8318 sec, wrote 3429273687 right entries [P3-2] Table 2 took 30.8426 sec, wrote 3429273687 left entries, 3429273687 final [P3-1] Table 3 took 47.6665 sec, wrote 3439728899 right entries [P3-2] Table 3 took 30.5299 sec, wrote 3439728899 left entries, 3439728899 final [P3-1] Table 4 took 48.0524 sec, wrote 3465809153 right entries [P3-2] Table 4 took 30.8944 sec, wrote 3465809153 left entries, 3465809153 final [P3-1] Table 5 took 48.5611 sec, wrote 3532526128 right entries [P3-2] Table 5 took 30.5813 sec, wrote 3532526128 left entries, 3532526128 final [P3-1] Table 6 took 50.2101 sec, wrote 3712785806 right entries [P3-2] Table 6 took 31.649 sec, wrote 3712785806 left entries, 3712785806 final [P3-1] Table 7 took 52.0859 sec, wrote 4293318965 right entries [P3-2] Table 7 took 36.3718 sec, wrote 4293318965 left entries, 4293318965 final Phase 3 took 479.049 sec, wrote 21873442638 entries to final plot [P4] Starting to write C1 and C3 tables [P4] Finished writing C1 and C3 tables [P4] Writing C2 table [P4] Finished writing C2 table Phase 4 took 54.5431 sec, final plot size is 108813138567 bytes Total plot creation time was 1718.34 sec (28.639 min) I was testing it before with using a SAS raid for the temp and it was around 36 mins. I have more testing to do but looks like I will go back to using the SAS temp as while you can plot in memory with 256gb, you need to wait for it to copy to the disk in order to start the next plot, this delay will end up causing it to be a wash I am guessing. There are some new option in the plotter I am going to play with as well to see if I can gain anything but I will be happy with ~35 min plot times. Was fun to see some ~7 year old hardware cracking the 30 min mark though. Edited July 15, 2021 by TexasUnraid Quote Link to comment
TexasUnraid Posted July 15, 2021 Share Posted July 15, 2021 (edited) Ok, gonna be posting a lot of logs, mostly for my own reference and anyone that might find this on google. Testing different bucket settings and the new madmax options surrounding them on the 100% ram system. Then going to see if they translate to the ram + SAS raid. Starting out with 128 buckets: Number of Threads: 32 Number of Buckets P1: 2^7 (128) Number of Buckets P3+P4: 2^7 (128) Working Directory: /media/chia/ramdisk/ Working Directory 2: /media/chia/ramdisk/ [P1] Table 1 took 14.4255 sec [P1] Table 2 took 128.581 sec, found 4295025245 matches [P1] Table 3 took 150.95 sec, found 4294931240 matches [P1] Table 4 took 183.602 sec, found 4294806051 matches [P1] Table 5 took 181.925 sec, found 4294695404 matches [P1] Table 6 took 176.151 sec, found 4294433249 matches [P1] Table 7 took 134.767 sec, found 4293961390 matches Phase 1 took 970.42 sec [P2] max_table_size = 4295025245 [P2] Table 7 scan took 9.41944 sec [P2] Table 7 rewrite took 44.1489 sec, dropped 0 entries (0 %) [P2] Table 6 scan took 31.7209 sec [P2] Table 6 rewrite took 46.1459 sec, dropped 581340713 entries (13.5371 %) [P2] Table 5 scan took 30.1406 sec [P2] Table 5 rewrite took 45.0279 sec, dropped 762048126 entries (17.7439 %) [P2] Table 4 scan took 29.4124 sec [P2] Table 4 rewrite took 44.0511 sec, dropped 828875638 entries (19.2995 %) [P2] Table 3 scan took 29.1961 sec [P2] Table 3 rewrite took 44.3334 sec, dropped 855119626 entries (19.91 %) [P2] Table 2 scan took 28.9088 sec [P2] Table 2 rewrite took 43.8982 sec, dropped 865636288 entries (20.1544 %) Phase 2 took 447.712 sec Wrote plot header with 268 bytes [P3-1] Table 2 took 43.0605 sec, wrote 3429388957 right entries [P3-2] Table 2 took 34.9098 sec, wrote 3429388957 left entries, 3429388957 final [P3-1] Table 3 took 47.8797 sec, wrote 3439811614 right entries [P3-2] Table 3 took 35.8796 sec, wrote 3439811614 left entries, 3439811614 final [P3-1] Table 4 took 48.3672 sec, wrote 3465930413 right entries [P3-2] Table 4 took 35.316 sec, wrote 3465930413 left entries, 3465930413 final [P3-1] Table 5 took 50.2099 sec, wrote 3532647278 right entries [P3-2] Table 5 took 36.7005 sec, wrote 3532647278 left entries, 3532647278 final [P3-1] Table 6 took 50.8051 sec, wrote 3713092536 right entries [P3-2] Table 6 took 37.8581 sec, wrote 3713092536 left entries, 3713092536 final [P3-1] Table 7 took 45.5346 sec, wrote 4293961390 right entries [P3-2] Table 7 took 44.1629 sec, wrote 4293961390 left entries, 4293961390 final Phase 3 took 516.738 sec, wrote 21874832188 entries to final plot [P4] Starting to write C1 and C3 tables [P4] Finished writing C1 and C3 tables [P4] Writing C2 table [P4] Finished writing C2 table Phase 4 took 75.5717 sec, final plot size is 108821644148 bytes Total plot creation time was 2010.53 sec (33.5088 min) Edited July 15, 2021 by TexasUnraid Quote Link to comment
TexasUnraid Posted July 16, 2021 Share Posted July 16, 2021 Here is 64 buckets, slower across the board it appears: Number of Threads: 32 Number of Buckets P1: 2^6 (64) Number of Buckets P3+P4: 2^6 (64) Working Directory: /media/chia/ramdisk/ Working Directory 2: /media/chia/ramdisk/ [P1] Table 1 took 15.2966 sec [P1] Table 2 took 145.271 sec, found 4294938267 matches [P1] Table 3 took 180.38 sec, found 4294824593 matches [P1] Table 4 took 252.622 sec, found 4294768969 matches [P1] Table 5 took 250.835 sec, found 4294464145 matches [P1] Table 6 took 242.239 sec, found 4293963374 matches [P1] Table 7 took 160.237 sec, found 4293004577 matches Phase 1 took 1246.9 sec [P2] max_table_size = 4294967296 [P2] Table 7 scan took 9.41295 sec [P2] Table 7 rewrite took 44.9678 sec, dropped 0 entries (0 %) [P2] Table 6 scan took 34.6734 sec [P2] Table 6 rewrite took 47.2035 sec, dropped 581374923 entries (13.5394 %) [P2] Table 5 scan took 30.0111 sec [P2] Table 5 rewrite took 44.5491 sec, dropped 762077871 entries (17.7456 %) [P2] Table 4 scan took 29.4697 sec [P2] Table 4 rewrite took 44.6569 sec, dropped 828976311 entries (19.302 %) [P2] Table 3 scan took 29.398 sec [P2] Table 3 rewrite took 44.0034 sec, dropped 855135375 entries (19.9108 %) [P2] Table 2 scan took 28.6311 sec [P2] Table 2 rewrite took 43.6363 sec, dropped 865605977 entries (20.1541 %) Phase 2 took 454.033 sec Wrote plot header with 268 bytes [P3-1] Table 2 took 43.9276 sec, wrote 3429332290 right entries [P3-2] Table 2 took 36.7081 sec, wrote 3429332290 left entries, 3429332290 final [P3-1] Table 3 took 51.6698 sec, wrote 3439689218 right entries [P3-2] Table 3 took 40.4516 sec, wrote 3439689218 left entries, 3439689218 final [P3-1] Table 4 took 52.2376 sec, wrote 3465792658 right entries [P3-2] Table 4 took 40.37 sec, wrote 3465792658 left entries, 3465792658 final [P3-1] Table 5 took 53.1467 sec, wrote 3532386274 right entries [P3-2] Table 5 took 43.5899 sec, wrote 3532386274 left entries, 3532386274 final [P3-1] Table 6 took 57.2939 sec, wrote 3712588451 right entries [P3-2] Table 6 took 44.7291 sec, wrote 3712588451 left entries, 3712588451 final [P3-1] Table 7 took 124.282 sec, wrote 4293004577 right entries [P3-2] Table 7 took 50.5683 sec, wrote 4293004577 left entries, 4293004577 final Phase 3 took 646.579 sec, wrote 21872793468 entries to final plot [P4] Starting to write C1 and C3 tables [P4] Finished writing C1 and C3 tables [P4] Writing C2 table [P4] Finished writing C2 table Phase 4 took 79.8054 sec, final plot size is 108809103812 bytes Total plot creation time was 2427.4 sec (40.4567 min) Quote Link to comment
TexasUnraid Posted July 16, 2021 Share Posted July 16, 2021 256 buckets, faster on some things, slower on others but only a few seconds either way. Number of Threads: 32 Number of Buckets P1: 2^8 (256) Number of Buckets P3+P4: 2^8 (256) Working Directory: /media/chia/ramdisk/ Working Directory 2: /media/chia/ramdisk/ [P1] Table 1 took 18.1239 sec [P1] Table 2 took 142.07 sec, found 4294768808 matches [P1] Table 3 took 152.953 sec, found 4294509455 matches [P1] Table 4 took 177.47 sec, found 4293988299 matches [P1] Table 5 took 171.224 sec, found 4293053380 matches [P1] Table 6 took 171.371 sec, found 4291207147 matches [P1] Table 7 took 139.683 sec, found 4287502581 matches Phase 1 took 972.918 sec [P2] max_table_size = 4294967296 [P2] Table 7 scan took 9.35963 sec [P2] Table 7 rewrite took 46.6701 sec, dropped 0 entries (0 %) [P2] Table 6 scan took 31.0298 sec [P2] Table 6 rewrite took 47.0249 sec, dropped 581765883 entries (13.5572 %) [P2] Table 5 scan took 30.4548 sec [P2] Table 5 rewrite took 44.6864 sec, dropped 762522231 entries (17.7618 %) [P2] Table 4 scan took 29.5452 sec [P2] Table 4 rewrite took 44.3981 sec, dropped 829300502 entries (19.3131 %) [P2] Table 3 scan took 29.7228 sec [P2] Table 3 rewrite took 45.1558 sec, dropped 855386503 entries (19.9181 %) [P2] Table 2 scan took 28.9209 sec [P2] Table 2 rewrite took 44.2191 sec, dropped 865771128 entries (20.1587 %) Phase 2 took 454.238 sec Wrote plot header with 268 bytes [P3-1] Table 2 took 41.2179 sec, wrote 3428997680 right entries [P3-2] Table 2 took 34.7569 sec, wrote 3428997680 left entries, 3428997680 final [P3-1] Table 3 took 50.5797 sec, wrote 3439122952 right entries [P3-2] Table 3 took 33.0423 sec, wrote 3439122952 left entries, 3439122952 final [P3-1] Table 4 took 49.4385 sec, wrote 3464687797 right entries [P3-2] Table 4 took 33.3755 sec, wrote 3464687797 left entries, 3464687797 final [P3-1] Table 5 took 51.0615 sec, wrote 3530531149 right entries [P3-2] Table 5 took 33.1539 sec, wrote 3530531149 left entries, 3530531149 final [P3-1] Table 6 took 51.3797 sec, wrote 3709441264 right entries [P3-2] Table 6 took 37.5681 sec, wrote 3709441264 left entries, 3709441264 final [P3-1] Table 7 took 43.6335 sec, wrote 4287502581 right entries [P3-2] Table 7 took 38.4937 sec, wrote 4287502581 left entries, 4287502581 final Phase 3 took 505.292 sec, wrote 21860283423 entries to final plot [P4] Starting to write C1 and C3 tables [P4] Finished writing C1 and C3 tables [P4] Writing C2 table [P4] Finished writing C2 table Phase 4 took 76.7261 sec, final plot size is 108733840303 bytes Total plot creation time was 2009.27 sec (33.4878 min) Quote Link to comment
TexasUnraid Posted July 16, 2021 Share Posted July 16, 2021 512 buckets which a lot of people seem to be using for some reason: Number of Threads: 32 Number of Buckets P1: 2^9 (512) Number of Buckets P3+P4: 2^9 (512) Working Directory: /media/chia/ramdisk/ Working Directory 2: /media/chia/ramdisk/ [P1] Table 1 took 16.349 sec [P1] Table 2 took 159.521 sec, found 4294929308 matches [P1] Table 3 took 172.996 sec, found 4294885073 matches [P1] Table 4 took 188.603 sec, found 4294717907 matches [P1] Table 5 took 184.646 sec, found 4294375685 matches [P1] Table 6 took 182.09 sec, found 4293778019 matches [P1] Table 7 took 159.622 sec, found 4292575205 matches Phase 1 took 1063.87 sec [P2] max_table_size = 4294967296 [P2] Table 7 scan took 9.60966 sec [P2] Table 7 rewrite took 45.5682 sec, dropped 0 entries (0 %) [P2] Table 6 scan took 33.3586 sec [P2] Table 6 rewrite took 52.02 sec, dropped 581424593 entries (13.5411 %) [P2] Table 5 scan took 30.2597 sec [P2] Table 5 rewrite took 45.9095 sec, dropped 762140320 entries (17.7474 %) [P2] Table 4 scan took 29.3417 sec [P2] Table 4 rewrite took 45.5899 sec, dropped 828987891 entries (19.3025 %) [P2] Table 3 scan took 29.2111 sec [P2] Table 3 rewrite took 45.4074 sec, dropped 855171294 entries (19.9114 %) [P2] Table 2 scan took 29.3239 sec [P2] Table 2 rewrite took 44.7393 sec, dropped 865599697 entries (20.154 %) Phase 2 took 463.376 sec Wrote plot header with 268 bytes [P3-1] Table 2 took 42.042 sec, wrote 3429329611 right entries [P3-2] Table 2 took 39.2584 sec, wrote 3429329611 left entries, 3429329611 final [P3-1] Table 3 took 56.8396 sec, wrote 3439713779 right entries [P3-2] Table 3 took 37.9086 sec, wrote 3439713779 left entries, 3439713779 final [P3-1] Table 4 took 57.467 sec, wrote 3465730016 right entries [P3-2] Table 4 took 39.6152 sec, wrote 3465730016 left entries, 3465730016 final [P3-1] Table 5 took 57.9517 sec, wrote 3532235365 right entries [P3-2] Table 5 took 38.9307 sec, wrote 3532235365 left entries, 3532235365 final [P3-1] Table 6 took 60.0599 sec, wrote 3712353426 right entries [P3-2] Table 6 took 41.1037 sec, wrote 3712353426 left entries, 3712353426 final [P3-1] Table 7 took 47.1617 sec, wrote 4292575205 right entries [P3-2] Table 7 took 46.7867 sec, wrote 4292575205 left entries, 4292575205 final Phase 3 took 572.086 sec, wrote 21871937402 entries to final plot [P4] Starting to write C1 and C3 tables [P4] Finished writing C1 and C3 tables [P4] Writing C2 table [P4] Finished writing C2 table Phase 4 took 66.3509 sec, final plot size is 108803720173 bytes Total plot creation time was 2165.78 sec (36.0963 min) Quote Link to comment
sota Posted July 16, 2021 Share Posted July 16, 2021 Thu 07/15/2021 23:01:59.29 -Total Balance: 4.0 avo (4000000000000 slice) -Total Balance: 2500.0 cgn (2500000000000000 mio) -Total Balance: 2.000001600351 xch (2000001600351 mojo) -Total Balance: 0.0 xcd (0 mojo) -Total Balance: 16.0 xdg (16000000000000 mojo) -Total Balance: 20.0 xeq (20000000000000 mojo) -Total Balance: 12.0 xfx (12000000000000 mojo) -Total Balance: 20.0 xfl (20000000000000 mojo) -Total Balance: 600.0 gdog (600000000000000 dog) -Total Balance: 38.0 xgj (38000000000000 moji) -Total Balance: 50.0 hdd (50000000000000 mojo) -Total Balance: 28.0 xka (28000000000000 mojo) -Total Balance: 20.0 xsc (20000000000000 octet) -Total Balance: 32.0 xse (32000000000000 mojo) -Total Balance: 26.0 tsit (26000000000000 mojo) -Total Balance: 52.0 spare (52000000000000 graviton) -Total Balance: 4.0 wheat (4000000000000 mojo) 1 Quote Link to comment
sota Posted July 16, 2021 Share Posted July 16, 2021 https://pastebin.com/VxEqskKk still think that the plots aren't as random as they could be, and that the whole system goes in cycles. Quote Link to comment
TexasUnraid Posted July 16, 2021 Share Posted July 16, 2021 (edited) lol, I have not even begun to dig that deep into things. I actually almost got into mining back in 2010, right after bitcoin came out. I had 5 gaming computers that were sitting around doing nothing and almost set them all to mine. But it was hot and in the summer and I was worried about the electric costs and keeping the house cool so I passed. I then almost got into it again in 2012 when someone was telling me about it but I figured if you are not first, you are last and figured it would peter out soon anyways so passed again. I would be a millionaire now if I had followed my gut either time lol. I actually only starting mining of any kind a few months ago when bitcoin shot up and realized my gaming systems could make decent money mining at night. All that to say, I am still very new to crypto and mining. I barely know how to use crypto, at this point all I have managed to do was make 2 small orders with bitcoin lol. I want to trade my bitcoin for ravencoin since it's halving is coming up and seems like a reasonable use of $100. All the exchanges I looked into want my ID and pictures and other super creepy stuff, screw that. I don't even know what I will do with these poop coins lol. Edited July 16, 2021 by TexasUnraid Quote Link to comment
sota Posted July 16, 2021 Share Posted July 16, 2021 oh i'm a n00b still too. everything is down, while I clone FARM1's boot drive, as FARM2 arrived today. definitely going with the split/crossing setup for now. also looks like, I might do some TIMELORD work for a couple coins, if they provide some incentive. Quote Link to comment
TexasUnraid Posted July 16, 2021 Share Posted July 16, 2021 timelord? What is that? Quote Link to comment
sota Posted July 17, 2021 Share Posted July 17, 2021 well this sucks. got the other nr12000 in today. looks like the LSI 2008 controller onboard, is DOA. Quote Link to comment
TexasUnraid Posted July 17, 2021 Share Posted July 17, 2021 Well that really sucks, be sure to try flashing the adapter, the firmware flashing software is pretty powerful and can recover a lot of things. Quote Link to comment
sota Posted July 17, 2021 Share Posted July 17, 2021 also, did you upgrade to 0.0.9 for silicoin, and get f**ked out of your earnings as they're off testnet8 and on to testnet? Quote Link to comment
sota Posted July 17, 2021 Share Posted July 17, 2021 1 hour ago, TexasUnraid said: Well that really sucks, be sure to try flashing the adapter, the firmware flashing software is pretty powerful and can recover a lot of things. it's a built in adapter. you think that might still work? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.