Skip to content
View in the app

A better way to browse. Learn more.
Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Unraid Summer Sale in live: 20% off Starter and Unleashed + buy one, get one 50% off

Is there any way to find out if unRAID has recognised all SATA controllers/ports

keyvan
in General Support (V5 and Older)

Featured Replies

I have just built a 20 bay server and installed: 1x Adaptec 1430SA, 1x AOC-SASLP-MV8, 1x Startech 2port (JMicron JMB363).

Following instructions on wiki, I installed the drives (6 initially) on the motherboard. I am only installing 8 2Tb drives fro now. The other 2 are still preclearing.

I checked the syslog and found no errors.

My question is; short of powering down, plugging a drive in every slot (1 at atime) then rebooting to see if the drive was recognised by unraid, is there any way to see if unRAID has recognised all the host adapters and ports and that they are functioning as expected?

 

Thank you.

  • Quote

    The only way to know for sure is to put a drive on the port.

  • Quote

    • Archived

    This topic is now archived and is closed to further replies.

    Go to topic listing

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.