zetabax Posted May 2, 2021 Share Posted May 2, 2021 Hey guys, My Unraid setup consists of 12 10TB SAS drives running BTRFS with 2 parity drives. Recently I started getting a consistent number of errors on my weekly parity check (Finding 17836 errors). I've manually ran the checker insuring 'Write corrections to parity' is ticked but at the end of each scan i get the same number of errors. According to SMART, all the disks appear to be in good health. I've attached the diagnosis file along with a couple of screen shots. As you'll see in the attached, I'm running a PowerEdge R730XD with a PERC controller flashed to LSI MegaRAID SAS-3 3108. Thanks in advance. quadra-diagnostics-20210501-2117.zip Quote Link to comment
JorgeB Posted May 2, 2021 Share Posted May 2, 2021 Diags only show one parity check, and it was non correcting, reboot the server to clear the logs, disable mover logging, run a correcting check then a non correcting one without rebooting, and post new diags after it's done. Quote Link to comment
zetabax Posted May 2, 2021 Author Share Posted May 2, 2021 Thanks @JorgeB! I will report back shortly Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.