Zeron Posted January 15, 2013 Author Share Posted January 15, 2013 What is it that makes these need to be specific to the version of unRAID? The kernel modules are compiled for, and will only install in the kernel that as used in the specific releases. Quote Link to comment
BobPhoenix Posted January 15, 2013 Share Posted January 15, 2013 All good here: I'm running ESXi 5.1, and unRAID 5.0-rc10. With open_vm_tools-2012.10.14.874563_unRaid5.0rc10-i686-8Zeron.plg installed I used the vSphere Client to Shut Down the unRAID guest. Powering the machine back on was as expected (no parity check). Following the same procedure on previous versions always resulted in a parity check. I have also run restart guest from the vSphere Client software, and the array also came up clean. Thanks Zeron!! Worked for me on ESXi 5.0 and open_vm_tools-2012.10.14.874563_unRaid5.0rc10-i686-8Zeron.tgz. Restarted from vSphere Client while array was running. When the VM restarted and when I started the array (I have mine set to not auto start the array) it started up withOUT a parity check. Sorry - after coming back to this post I left out a VITAL part of a word above. Quote Link to comment
siamsquare Posted January 18, 2013 Share Posted January 18, 2013 New tools work perfectly on rc-10, no parity checks after dhutdown! Quote Link to comment
joeshmoe1 Posted January 20, 2013 Share Posted January 20, 2013 Thanks Zeron. The tools work great. Quote Link to comment
Worlok Posted January 20, 2013 Share Posted January 20, 2013 Is there an issue with the download site? I was able to download the files for my 4.7 server, but I was working on standing up a new 5.0rc10 box and today I can not download the files. Just wanted to verify it was not something on my end. Thanks, Rod Quote Link to comment
Zeron Posted January 21, 2013 Author Share Posted January 21, 2013 Is there an issue with the download site? I was able to download the files for my 4.7 server, but I was working on standing up a new 5.0rc10 box and today I can not download the files. Just wanted to verify it was not something on my end. Thanks, Rod The server hosting the files is in the process of being moved from a data center in San Fransisco to Las Vegas. Should be back in a few hours. Quote Link to comment
bubbers214 Posted January 22, 2013 Share Posted January 22, 2013 Is the server still down?? I can't seem to access the site to download. Quote Link to comment
Zeron Posted January 22, 2013 Author Share Posted January 22, 2013 Is the server still down?? I can't seem to access the site to download. No. It is working fine from here. http://www.downforeveryoneorjustme.com/unraid.zeron.ca Quote Link to comment
bubbers214 Posted January 22, 2013 Share Posted January 22, 2013 Is the server still down?? I can't seem to access the site to download. No. It is working fine from here. http://www.downforeveryoneorjustme.com/unraid.zeron.ca Looks like it's bouncing up and down. I got to it temporarily and got the VMTools and then tried to get another plugin and it failed. Now downforeveryone is saying that its down. Quote Link to comment
jangjong Posted January 24, 2013 Share Posted January 24, 2013 have a question about this.. How does 'VMWare tools' benefit unRAID? I have a separate NIC that is getting pass through unRAID VM.. and all my hdd's are connected to the MV8 card which is also using hardware pass through. So those main things aren't virtualized so im wondering what would be the benefit of installing VMWare tools for the situation I am in. Quote Link to comment
sureguy Posted January 24, 2013 Share Posted January 24, 2013 Proper power down via the vSphere client especially important if you have a ups Sent from my SGH-I747M using Tapatalk 2 Quote Link to comment
Zeron Posted January 25, 2013 Author Share Posted January 25, 2013 have a question about this.. How does 'VMWare tools' benefit unRAID? Aside from the already mentioned; it also includes time syncing to the esxi host. The virtual machine clock has a tendency to drift. This will allows it to stay in sync with the host and other VM's. It will work better than using ntp within the guest. It will also fill in the IP address on the Summary page in vShpere. Quote Link to comment
Zeron Posted January 29, 2013 Author Share Posted January 29, 2013 Version for 5.0rc11 posted. Quote Link to comment
PCRx Posted February 16, 2013 Share Posted February 16, 2013 Just upgraded to rc11. I'm getting this message at bootup: unable to resolve host address unraid.zeron.ca Pings to that address are resolved. I'm thinking that unraid networking isn't up and running before that connection is attempted. Any workarounds? Update: It was the NIC. Was slow to take up the DHCP. Set the IP to static and it's all good now. Quote Link to comment
johnodon Posted March 16, 2013 Share Posted March 16, 2013 OK...here is my experience... ESXi 5.1.799733 unRAID b5RC11 I installed open_vm_tools-2012.10.14.874563_unRaid5.0rc11-i686-8Zeron.tgz manually to the /extra/ folder and rebooted. OpenTools installed fine: I then tried to shutdown the unRAID guest via the "Shutdown Guest" button in Vsphere client and it shut down instantly. I received the same error in teh Events that other had posted earlier about the script failing to run. I powered the unRAID VM and it initiated a parity check (as expected). I decided to try the RC10 version and see if I had better success with that. Installed it the same way, stopped the parity check, stopped the array and rebooted via the webgui. This time the script failed to install the modules (FATAL errors). I'm guessing tha this may have been expected since I am mixing unraid versions and opentools plgin versions. Oh well...it was worth a shot. So, I removed the RC10 plugin and tried one more time to install the RC11 plugin (same method). This time when I initiated a shutdown via the Vsphere client, the array was stopped and unraid shutdown cleanly...no parity check at next start. So, the moral of the story...I have absolutely no idea what made it work but it does! Thank you for your efforts! John Quote Link to comment
johnodon Posted March 16, 2013 Share Posted March 16, 2013 FYI...also tested the "Restart Guest"... Array stopped and unRAID restarted without issue. John Quote Link to comment
madburg Posted March 23, 2013 Share Posted March 23, 2013 Zeron, will u be blessing us with a complied version for RC12? Quote Link to comment
Zeron Posted March 23, 2013 Author Share Posted March 23, 2013 Zeron, will u be blessing us with a complied version for RC12? It's compiling right now - Barring any issues; it should be posted within an hour. I was many miles from a computer when the RC12 release was posted... Quote Link to comment
madburg Posted March 23, 2013 Share Posted March 23, 2013 Many thanks! I had a feeling u were on holiday or something. Cause usually you spit out an update so fast I think your neighbors with Tom Quote Link to comment
Zeron Posted March 23, 2013 Author Share Posted March 23, 2013 Version compiled for RC12 has been posted. Quote Link to comment
siamsquare Posted March 23, 2013 Share Posted March 23, 2013 hmm getting parity checks again at startup,using RC12 and VMWare tools for RC12! Quote Link to comment
BetaQuasi Posted March 24, 2013 Share Posted March 24, 2013 hmm getting parity checks again at startup,using RC12 and VMWare tools for RC12! Not having this issue - perhaps something localised? Not sure what it might be but a syslog might hint at the issue. Quote Link to comment
Hesse34 Posted March 24, 2013 Share Posted March 24, 2013 Tom put up an RC12a because of a networking issues. Does this plugin need to be rebuilt for the RC12a or is the current one good to go? Thanks, Jesse Quote Link to comment
BetaQuasi Posted March 24, 2013 Share Posted March 24, 2013 rc12 plugin works fine on rc12a Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.